RIG Icom IC-706MKIIG HF/VHF/UHF All Mode Transceiver

Specifications
General
Frequency range
Receive
Transmit
0.030 - 199.999 MHz* 400 - 470 MHz*
1.8 - 1.999 MHz* 3.5 - 3.999 MHz*
7.0 - 7.300 MH* 10.1 - 10.150 MHz
14.0 - 14.350 MHz 18.068 - 18.168 MHz
21.0 - 21.450 MHz 24.89 - 24.990 MHz
28.0 - 29.700 MHz 50.0 - 54.000 MHz*
144.0 - 148.000 MHz* 430.0 - 450.000 MHz*
* Varies according to version
Mode USB, LSB, CW, RTTY (FSK), AM, FM, WFM (Rx only)
No. of Memory Channels 107 (99 regular, 6 scan edges, 2 call channels)
Antenna Connector SO-239x2 (for HF/50 MHz and 144/430 MHz)/50©
Frequency stability Less than ± 7ppm from 1 min. to 60 min. after power ON. After that rate of stability less than ± 1 ppm/hr. at +25 °C (+77°F). Temperature fluctuations 0°C to +50°C (+32°F to +122°F) less than ±5 ppm.
Current Drain
Tx Max 20 A
Rx Standby 1.8A
Max Audio 2.0 A
Temperature Range -10°C to 60°C;
14°F to 140°F
Dimensions
(projections not included) 167(W) X 58(H) X 200(D) mm;
69/16(W) X 29/32(H) X 77/8(D) in
Weight (approx.) 2.45 kg (5 lb 6 oz)
CI-V connector 2 conductor, 3.5 (d) mm (1/8")
ACC Connector 13 pin
Transmitter
Output Power
SSB/CW/RTTY/FM AM
HF/50 MHz 5 - 100 W 2 - 40 W
144 MHz 2.5 - 50 W 2 - 20 W
440 MHz 2 - 20 W 2 - 8 W

Modulation System

SSB

AM

FM

Balanced modulation

Low level modulation

Variable reactance modulation

Spurious Emissions

Below 47.5MHz

47.5-50MHz

Above 50MHz

Less than -60 dB

-50 to -60 dB

-60 dB
Carrier Suppression More than 40 dB
Unwanted Sideband More than 50 dB
MIC Connector 8 pin modular jack (600©)
KEY connector 3-conductor 6.35 (d) mm (1D43)
RTTY connector 3-conductor 3.5 (d) mm (1D83)
Receiver

Receiving system

SSB/CW/AM/WFM

FM

Double superheterodyne

Triple superheterodyne
Intermediate frequencies (Unit: MHZ)
1st 2nd 3rd
SSB/AM-N/FM 69.0115 9.0115 0.455*
CW 69.0106 9.0106 —
RTTY 69.0105 9.0105 —
AM/FM-N 69.0100 9.0100 0.455*
WFM 70.7000 10.7000 —
*FM only
Receive sensitivity (preamp on; except 4-4.5 and 8-9 MHz)
SSB/CW
10 dB S/N AM
10 dB S/N FM
12 dB SINAD WFM
12 dB SINAD
0.5-1.8 MHz - 13µV - -
1.8-28 MHz 0.15µV 2.0µV 0.5µV -
28.0 - 29.7 0.15µV 2.0µV 0.5µV -
50.0MHz band 0.12µV 1.0µV 0.25µV -
76-108MHz - - - 10.0µV
144/440 MHz band 0.11µV 1.0µV 0.18µV -

Squelch Sensitivity (threshold)

SSB

FM

Less than 5.6 µV

Less than 0.3 µV

Selectivity (normal)

SSB, CW, RTTY

AM/FM-N

FM

More than 2.4 kHz/- 6 dB

Less than 4.8 kHz/ -60 dB

More than 8.0 kHz/-6 dB

Less than 30 kHz/-36 dB

More than 12 kHz/-6 dB

Less than 30 kHz/-60 dB
Spurious and Image Rejection
HF bands
50 MHz
144/430(440) MHz

More than 70 dB
More than 65 dB (except IF through)
More than 65 dB
Audio output power More than 2.0 W (at 13.8 V DC)
RIT Variable Range ±9.99 kHz
PHONES connector 3-conductor, 3.5 (d) mm (1D83)/8©
External SP Connector 2-conductor, 3.5 (d) mm (1D83)/8©

The IC-706MKIIG meets MIL-STD requirements and strict environmental standards for shock (MIL 810C, D, E) and vibration (MIL 810C, D, E).

All stated specifications are subject to change without notice or obligation.
Supplied Accessories

* Hand Microphone
* RTTY Key Plug
* DC Power Cable
* Electronic Keyer Plug
* Spare Fuses
* ACC Cable