Keterangan :

HIOKI 3286-20, CLAMP ON POWER HiTESTER Call Syihabudin 085282731888/ 081908101888

Functionality and Safety Packed into a Handheld Unit

Single phase 600 kW & up to 20th Harmonic levels measurement
Active/ reactive/ apparent power, Power factor, Phase detection, Frequency, Harmonic waveform value, or Waveform peak value
Simple checking of three-phase lines ( Should be balanced and no distortion)

Note: The 3286-20' s three-phase power measurement method calculates and displays the power values for a sine wave input at 50/ 60 Hz, assuming it is balanced and there is no distortion. Accurate measurement is not possible on a three-phase line if it is not balanced, for example when controlled by an inverter or thyristor. Since there is no integration function, it is not possible to measure total energy consumed ( Wh) .
Basic specifications ( Accuracy guaranteed for 1 year, or opening and closing of the clamp sensor 10, 000 times)
Measurement line Single-phase, Three-phase ( should be balanced and no distortion)
Measurement items Voltage, Current, Voltage/ current peak, Active/ reactive/ apparent power, Power factor, Phase angle, Reactivity, Frequency, Voltage/ current harmonic levels
Voltage ranges
30 - 1kHz 150.0 V to 600 V, 3 ranges
Basic accuracy: ± 1.0 % rdg. ± 3 dgt. ( at 45 - 66 Hz, True RMS)
Current ranges
45 - 1kHz 20.00 A to 1000 A, 3 ranges
Basic accuracy: ± 1.3 % rdg. ± 3 dgt. ( at 45 - 66 Hz, True RMS)
Power ranges
80 - 600 V
1 - 1000 A [ Single phase] 3.000 kW to 600.0 kW
Basic accuracy: ± 2.3 % rdg. ± 5 dgt. ( at 50/ 60 Hz, Power factor = 1)
[ Balanced three phase] 6.000 kW to 1200 kW
Basic accuracy: ± 3.0 % rdg. ± 10 dgt. ( at 50/ 60 Hz, Power factor = 1)
Harmonic levels Voltage/ current harmonic levels up to 20th, Content factor, Total harmonic distortion ratio
Other function [ Phase angle] Forward 90.0° to 0 to delay 90.0°
[ Power factor] Forward 0 to 1.000 to delay 0
[ Frequency] 30.0 Hz to 1000 Hz
Waveform peak, Phase detection, Max. / Min. value record, Data hold, Auto-power off, RS-232C output ( option)
Display LCD, Max. 6000 digits, Display refresh rate: 1 time/ s ( Normal) 1 time/ 3sec ( Slow) , 1 time/ 2sec ( Harmonic level)
Power supply Stacked alkaline battery ( 6LR61, 6LF22) × 1, Continuous use: 25 hours
Core jaw dia. Æ 55 mm ( 2.17 in) or 80 mm ( 3.15 in) × 20 mm ( 0.79 in) busbar
Dimensions, mass 100 mm ( 3.94 in) W × 287 mm ( 11.3 in) H × 39 mm ( 1.54 in) D, 650 g ( 22.9 oz)
Supplied accessories VOLTAGE CORD L9635-01 × 1, Carrying case × 1, Dry cell battery ( 6LF22) × 1, Hand strap × 1, Instruction Manual × 1

Hubungi toko DINS ( Digital Instruments)
Jl. Ciledug Raya Komplek. Taman Surya Buana Blok L19 - Kreo - Cipadu, Ciledug - Tangerang 15155
CP : Irfan Syihabudin
XL : 081908101888
AS : 085282731888