Selamat Datang di
Digital Instruments | Alat Test, Kyoritsu, Fluke, Sanwa, Hioki, Mastech, Lutron, Dekko, Protek

Anggota Gratis
Digital Instruments | Alat Test, Kyoritsu, Fluke, Sanwa, Hioki, Mastech, Lutron, Dekko, Protek
Indonesia
  • Jual

    Fluke 789,  Processmeter Call Syihabudin 085282731888

    Fluke 789, Processmeter Call Syihabudin 085282731888

    Harga:
    Call me at 081908101888/085282731888
    Jumlah Pesanan:
    Negara Asal:
    Amerika Serikat
    Cara Pembayaran:
    Transfer Bank (T/T), Tunai, Cek Bank
    Kemas & Pengiriman:
    unit
    Process Meter Fluke 789 Call Irfan 085282731888/ 081908101888

    Features of the Fluke 789
    24 V Loop power supply
    Very large dual display
    Enhanced backlight with 2 brightness settings
    1200 Ohm drive capability on mA source
    HART mode setting with loop power and a built-in 250 ohm resistor
    0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
    Externally accessible fuses for easy replacement
    Infrared-port to process data in FlukeView Forms ( V2.1) software

    Fluke 789 features that are also included in the Fluke 787
    Precision 1000 V, 440 mA True-RMS digital Multimeter
    0.1% dc voltage accuracy
    0.05% dc current accuracy
    Frequency measurement to 20 kHz
    Min/ Max/ Average/ Hold/ Relative modes
    Diode Test and Continuity Beeper
    Simultaneous mA and % of scale readout
    20 mA DC current source / loop calibrator / simulator
    Manual Step ( 100% , 25% , Coarse, Fine) plus Auto Step and Auto Ramp
    Externally accessible battery for easy battery changes

    Safety Conformance
    Meets 1000 Volt EN61010-1 CAT III standards and 600 Volt EN61010-1 CAT IV standards.

    Specifications
    Current Measurement
    Range: 0-1 A AC or DC
    Resolution: 1 mA
    Accuracy: 0.2% + 2 LSD ( DC)

    Range: 0-30 mA
    Resolution: 0.001 mA
    Accuracy: 0.05% + 2 LSD
    Current Sourcing
    Range: 0-20 mA or 4-20 mA
    Resolution: 0.05% of span
    Drive Capability: 24 V Compliance or 1200 ï ¿ ½ @ 20 mA
    Frequency
    to 19.999 kHz, 0.005% + 1 LSD
    Continuity
    Beeps for resistance < 100 ï ¿ ½
    Voltage measurement
    Range: 0-1000 V AC ( true-rms) or DC
    Resolution: 0.1 mV to 1.0 V
    Accuracy: 0.1% Rdg + 1 LSD ( VDC)
    Resistance measurement
    to 40 Mï ¿ ½ , 0.2% + 1 LSD
    Diode test
    2.0 V shows diode voltage drop
    Display current and % of span
    Yes
    Auto step, auto ramp
    Yes

    Environmental Specifications
    Operating Temperature
    -20 ï ¿ ½ C to 55 ï ¿ ½ C
    Storage Temperature
    -40 ï ¿ ½ C to 60 ï ¿ ½ C
    Humidity ( Without Condensation)
    95% up to 30 ï ¿ ½ C
    75% up to 40 ï ¿ ½ C
    45% up to 50 ï ¿ ½ C
    35% up to 55 ï ¿ ½ C
    Temperature Coefficient
    0.05 x ( specified accuracy) per ï ¿ ½ C ( for temperatures 28 ï ¿ ½ C)

    Safety Specifications
    Electrical Safety
    Designed in accordance with IEC 1010-1, ANSI/ ISA S82.01-1994 and CAN/ CSA C22.2 No. 1010.1-92
    Overvoltage category
    IEC 1010-1 CAT III 1000 V
    IEC 1010-1 CAT IV 600 V
    Maximum voltage
    1000 V rms

    Mechanical & General Specifications
    Size
    50 x 100 x 203 mm ( 1.25" H x 3.41" W x 7.35" L)
    Weight
    610 g ( 1.6 lbs)
    Batteries
    4 AA Alkaline batteries
    Battery Life
    140 hours typical ( measurement) , 10 hours typical ( sourcing 20 mA)
    Shock & Vibration
    Random, 2 g, 5-500 Hz
    1 meter drop test

    ProcessMeter Fluke 789
    Include :
    AC72 Alligator Clips
    Four AA 1.5 V alkaline battery ( installed)
    TL71 Safety-Designed Test lead Set
    Users Manual and Quick Reference Guide

    Hubungi toko DINS ( Digital Instruments)
    Jl. Ciledug Raya Komplek. Taman Surya Buana Blok L19 - Kreo - Cipadu, Ciledug - Tangerang 15155
    CP : Irfan Syihabudin
    XL : 081908101888
    AS : 085282731888
    ProcessMeterï ¿ ½ Fluke 789 Call Syihabudin 085282731888/ 081908101888

    Features of the Fluke 789
    24 V Loop power supply
    Very large dual display
    Enhanced backlight with 2 brightness settings
    1200 Ohm drive capability on mA source
    HART mode setting with loop power and a built-in 250 ohm resistor
    0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
    Externally accessible fuses for easy replacement
    Infrared-port to process data in FlukeView Forms ( V2.1) software

    Fluke 789 features that are also included in the Fluke 787
    Precision 1000 V, 440 mA True-RMS digital Multimeter
    0.1% dc voltage accuracy
    0.05% dc current accuracy
    Frequency measurement to 20 kHz
    Min/ Max/ Average/ Hold/ Relative modes
    Diode Test and Continuity Beeper
    Simultaneous mA and % of scale readout
    20 mA DC current source / loop calibrator / simulator
    Manual Step ( 100% , 25% , Coarse, Fine) plus Auto Step and Auto Ramp
    Externally accessible battery for easy battery changes

    Safety Conformance
    Meets 1000 Volt EN61010-1 CAT III standards and 600 Volt EN61010-1 CAT IV standards.

    Specifications
    Current Measurement
    Range: 0-1 A AC or DC
    Resolution: 1 mA
    Accuracy: 0.2% + 2 LSD ( DC)

    Range: 0-30 mA
    Resolution: 0.001 mA
    Accuracy: 0.05% + 2 LSD
    Current Sourcing
    Range: 0-20 mA or 4-20 mA
    Resolution: 0.05% of span
    Drive Capability: 24 V Compliance or 1200 ï ¿ ½ @ 20 mA
    Frequency
    to 19.999 kHz, 0.005% + 1 LSD
    Continuity
    Beeps for resistance < 100 ï ¿ ½
    Voltage measurement
    Range: 0-1000 V AC ( true-rms) or DC
    Resolution: 0.1 mV to 1.0 V
    Accuracy: 0.1% Rdg + 1 LSD ( VDC)
    Resistance measurement
    to 40 Mï ¿ ½ , 0.2% + 1 LSD
    Diode test
    2.0 V shows diode voltage drop
    Display current and % of span
    Yes
    Auto step, auto ramp
    Yes

    Environmental Specifications
    Operating Temperature
    -20 ï ¿ ½ C to 55 ï ¿ ½ C
    Storage Temperature
    -40 ï ¿ ½ C to 60 ï ¿ ½ C
    Humidity ( Without Condensation)
    95% up to 30 ï ¿ ½ C
    75% up to 40 ï ¿ ½ C
    45% up to 50 ï ¿ ½ C
    35% up to 55 ï ¿ ½ C
    Temperature Coefficient
    0.05 x ( specified accuracy) per ï ¿ ½ C ( for temperatures 28 ï ¿ ½ C)

    Safety Specifications
    Electrical Safety
    Designed in accordance with IEC 1010-1, ANSI/ ISA S82.01-1994 and CAN/ CSA C22.2 No. 1010.1-92
    Overvoltage category
    IEC 1010-1 CAT III 1000 V
    IEC 1010-1 CAT IV 600 V
    Maximum voltage
    1000 V rms

    Mechanical & General Specifications
    Size
    50 x 100 x 203 mm ( 1.25" H x 3.41" W x 7.35" L)
    Weight
    610 g ( 1.6 lbs)
    Batteries
    4 AA Alkaline batteries
    Battery Life
    140 hours typical ( measurement) , 10 hours typical ( sourcing 20 mA)
    Shock & Vibration
    Random, 2 g, 5-500 Hz
    1 meter drop test

    ProcessMeter Fluke 789
    Include :
    AC72 Alligator Clips
    Four AA 1.5 V alkaline battery ( installed)
    TL71 Safety-Designed Test lead Set
    Users Manual and Quick Reference Guide

    Hubungi toko DINS ( Digital Instruments)
    Jl. Ciledug Raya Komplek. Taman Surya Buana Blok L19 - Kreo - Cipadu, Ciledug - Tangerang 15155
    CP : Irfan Syihabudin
    XL : 081908101888
    AS : 085282731888


Anda mendapat [3] permintaan baru.
Ke Menu Anggota

Depan - Penawaran Dagang - Daftar Produk - Daftar Permintaan - Daftar Kerjasama - Daftar Perusahaan
© 2024 Indotrade.co.id. Hak Cipta Dilindungi Undang-undang.