Keterangan :

PAKET SOUND SYSTEM MEETING BESAR 9, TERDIRI DARI:

1 UNIT MIXER POWER AUDERPRO AP908PM, 8 CHANEL
4 UNIT SPEAKER PASIF AUDERPRO AP122, 12 INCH
1 SET MIC WIRELESS SHURE PGX/ BETA58 ( 2 MIC)
4 SET STAND TRIPOT SPEAKER
2 UNIT STAND MIC RASCHSER 2008
1 UNIT RACK HARDCASE FULL BODY 12U SILVER
4 ROLL KABEL SPEAKER TOYO 2X80 ( @ 35 METER)

Fungsi: Untuk Meeting, Rapat, Auditorium, Aula Besar, Kegiatan Lapangan, Gereja, Organ Tunggal, Kegiatan Pemilu/ kampanye, Upacara, Senam, Kantor, Seminar, Masjid, Hall, Band, Dll.

POWER MIXER AUDERPRO AP 908PM, 8 CHANEL

Specification:
Power output Max: 400 watt x 2
T.H.D: 0.1% below ( 1kHz full power)
Power consumption: 800 watt
Power requirements: AC 220V/ 50Hz Or 120V/ 60Hz
Outputs: 4 V max
Signal to noise ratio: -80dB
Parametric Eq: Hi .................... + 15dB/ 10kHz
Mid ................. + 15dB/ 250Hz-6kHz
Low ................ + 15dB/ 60Hz
Input channel sensitivity: Mic ................................. -60dB,
Stereo chanel input .... -40dB
Efx send ......................... -20dB,
Efx return ....................... -20dB

Balance input: 8 elecktronially balanced input acceptable a standard XLR male connector.
Line Input: 8 unbalanced mic input is provided for the use of a unbalanced mc and is designed to accept a unbalanced high impedance input signal. ( this use for connection Deck, Turntal , keyboard etc, .
Peak ( Peak Level Indicator) : A red Led indicates a signal level at he insert return point, premaster fader. It illuminate at approximately 5dB below clipping.
Gain Control: Adjusts input sensitivity from-60dB to -20dB with the - 20dB pad switch in the out position, and -40dB to 0dB when the - 20dB pad switch is pushed.
Pad ( -20dB) : when push this switch, attenuates the input signal -20dB.
High: Control the high frequency tone of each chanel. Always set this control to the 12 o" clok position, but you can control the high frequency tone according to the speaker, the conditionss of listening position and listener' s. Clock wise rotation of the control increases level.
Middle: This has a function which controls the middle frequency tone of each chanel. Always set this control to the 12 o" clok position, but you can control the middle frequency tone according to the speaker, the conditionss of listening position and listener' s. Clock wise rotation of the control increases level.
Low: Control the low frequency tone of each chanel. Always set this control to the 12 o" clok position, but you can control the low frequency tone according to the speaker, the conditionss of listening position and listener' s. Clock wise rotation of the control increases level.
Effect: Use this control to set the level of signal from external stereo souce and the main signal control is recontrolled by STEREO or MONO section
Rev: Use this control when you want to get effect sound by adjusment of input signal. When you don' t use external souce, digital delay will be working which installed inside.
Pan: The pan control sends countinuosly variable amounts of the post fader signal to either the left or right main busses. In the center position equal amounts of signal are sent to the left and right busses.
Pel: You can monitor signal of the only channel which PFL switch is turned " ON" using by headphone in useful. When PFL switch turned on, other channels or cut off automatically.
Channel fader: This is function to adjust the volume of signal connection into each channel and adjust the volume of output, together with master fader. Normal operating position is at the " O" mark, providing 4dB of gain above that point, if required. ect ............

SPEAKER PASSIVE AUDERPRO AP122, 12 INCH

In addition to acoustic performance the AP122 features three full size deep-well handles, light weight, and balanced ergonomics. The new generation of AP Series products offers true portability and ease of handling. Five standard M10 rigging points and integrated pole mount socket increase the system' s utility. The extremely rugged copolymer enclosure has been designed for main and 45° monitor orientation in the right hand configuration. A full screen-backed steel grille offers additional protection for both the woofer and compression driver components. Two-way speaker system designed for reinforcement of music and speech.

Features :
Best Quality Passive Speaker System.
Multiple handles with comfort rubber grips for easy transport.
100° H x 60° V asymmetrical wave guide for uniform audience coverage.

Applications :
Live sound reinforcement, speech and vocals, music playback in entertainment, A/ V, and institutional venues - especially when ease of use and portability are important factors.
Amplification ( Teaching, Assembly, Conference, Church, Parade, Lecture, Auction, Sales Promotion, Karaoke, Meeting, Music, and More...)

MODEL AP122

FREQ RESP + / -3DB 39 - 18 kHz
SENSITIVITY 1 W @ 1 M 98dB
PEAK SPL 130 dB
SYSTEM IMPEDANCE 8 Ohm
POWER RATING PEAK 1.000 Watt
POWER RATING CONTINUOUS 500 Watt
Frequency Range ( -10 dB) 41 Hz -20 kHz
SYSTEM TYPE 12" , 2 - Way
LOW PASS ( Hz) 2.5 kHz
HIGH PASS FILTER( Hz) -
FINISH MATERIAL Fiber Black
TRIPOLE STAND BOTTOM Yes
TRIPOLE STAND TOP No
CONNECTORS INPUT Speakon
-
CONNECTORS OUTPUT Speakon
WEIGHT NET ( KG) 12 Kg/ Pcs
WEIHT GROSS ( KG) 14 Kg/ Pcs
DEMENSIONS ( MM)
HEIGTH 600 MM
WIDTH 430 MM
DEPTH 330 MM

Mic Wireless Shure PGX/ BETA58

Dengan Frequency UHF. terdiri 1 Receiver Dan 2 Mic pegang ( 2 chanel) .
Durably constructed, with 12 compatible systems ( multiple bands) and included carrying case, PGX is the perfect system for performers on the go who want worry-free performance, every time.
Shure PGX systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
SystemWorking Range 100m ( 300 ft.)
Note: actual range depends on RF signal absorption, reflection, and interference
Audio Frequency Response + / - 2 dB, Minimum: 45 Hz, Maximum: 15 kHz
( Overall system frequency depends on microphone element., Total Harmonic Distortion
Ref. + / - 33 kHz deviation, 1 kHz tone, 0.5% , typical, Dynamic Range
> 100 dB A-weighted, Operating Temperature Range, -18° C ( 0° F) to + 50° C ( + 122° F)
Note: battery characteristics may limit this range, Transmitter Audio Polarity
Positive pressure on microphone diaphragm ( or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 ( with respect to pin 3 of low impedance output) and the tip of the high impedance 1/ 4-inch output.
PGX Handheld Transmitter
Audio Input Level, + 2 dBV maximum at -10dB position, -8 dBV maximum at 0dB position
Gain Adjustment Range 10dB
RF Transmitter Output 30 mW maximum ( dependent on applicable country regulations)
Weight 290 grams ( 10.2 oz.) without batteries
Housing Molded PC/ ABS handle and battery cup
Power Requirements Battery Life > 8 hours ( alkaline)
PGX Receiver
Dimensions 40 mm H x 181 mm W x 104 mm D ( 1.6 x 7.125 x 4.1 in.)
Weight 327 g ( 11.5 oz.) , Housing ABS
Audio Output Level ( ref. + / - 33 kHz deviation with 1 kHz tone) XLR connector ( into 600 © load) : -19 dBV, 1/ 4 inch connector ( into 3000 © load) : -5 dBV
Output Impedance XLR connector: 200 © , 1/ 4 inch connector: 1k© XLR output
Impedance balanced, Pin 1: Ground ( cable shield) , Pin 2: Audio, Pin 3: No Audio
Sensitivity -105 dBm for 12 dB SINAD, typical, Image Rejection > 70 dB, typical
Power Requirements, 12-18 Vdc at 150 mA, supplied by external power supply.

* HARGA TIDAK TERMASUK ONGKOS KIRIM DAN SETTING LUAR KOTA