Keterangan :

PAKET KARAOKE K: BMB + 2 SPEAKER AUDERPRO + MIC KABEL SHURE

1 UNIT MIXER AMPLIFIER BMB DA-2700DSP
2 UNIT SPEAKER AUDERPRO AP10-K, 10 INCH
2 UNIT MIC KABEL SHURE BETA58
1 SET STAND TRIPOT/ BRACKET GANTUNG SPEAKER
1 ROLL KABEL SPEAKER TOYO 2X80 ( @ 35 METER)
2 SET KABEL MIC CANARE @ 5 METER

MIXER AMPLIFIER BMB DA-2700 DSP SYSTEM

Special Features
* 185 Watt x 2 channel stereo amplifier.
* Two microphones can be used simultaneously.
* Low-impedance compatible power amplifier configuration that can drive two sets of speakers simultaneously.
* Easy to sing high perfomance digital echo.
* Digital Key controller Menu system
* Remote Controller ( Control of MASTER VOL and selector MUSIC INPUT A or B, Mode, Menu/ KEY CONTROLLER, Echo Vol Control , Repeat , Delay, Down and Up) .

Specifications:
RMS Output : 185 Watt + 185 Watt
Mic Input Sensitivity : 9mV
External Devices Sensitivity : 250mV
Signal/ Noise Ratio ( with IHF A Filter) : 85dB
T.H.D. : 0.1%
Frequency Band : 10Hz - 40kHz
MIC Tone Adjustment :
..... LO : 80Hz + 15dB
..... MID : 1.2kHz + 8dB
..... HI : 10Hz + 15dB
Music Tone Adjustment :
..... LO : 80Hz + 9dB
..... MID : 1.2kHz + 6dB
..... HI : 10Hz + 9dB
ECHO Tone Adjusment :
..... LO : 80Hz + 15dB
..... HI : 10Hz + 15dB
Power source : AC 220V/ 50Hz
Electric Consumption : 480 Watt
Weight : 12 Kg
Dimension ( mm) : 424 ( W) x 368 ( D) x 132 ( H)
Warranty : 1 Year

SPEAKER PASSIVE AUDERPRO AP10-K, 10 INCH

Whether your looking for a voice monitor for your recently re-grouped band, your newly opened karaoke bar, or to communicate on a new level with your neighbor, the AP10-K has you covered. With its 250 to 550-Watt power rating, your sure to be heard whatever the situation.

A loudspeaker system is nothing more than the sum of its components and Auderpro engineers employ only cutting-edge technologies. They certainly didn' t hold back with the AP10-K vocal monitor. Featuring a low diffraction IsoPower baffle, dual FreeFlow flared ports, and Straight-Line Signal Path, rest assured you' ll have good, clear sound. Plus both the dual 3-inch tweeters and the 10-inch woofer are backed by high-temperature voice coils. And the tweeters have the added advantage of protection circuitry that keeps the tweeter intact under adverse conditions-such as when your aunt Martha belts out " Nothing Compares 2 U.

The AP10-K monitor is equipped with left and right high-frequency trim controls that control the tweeters in the left and right side panels of each AP10 speaker. The trim controls enable you to compensate for various room conditions and vocal styles: adjust the trim controls so that the vocals are loud enough to be intelligible without being so loud as to be harsh or distorted.

Amplification ( Teaching, Assembly, Conference, Church, Parade, Lecture, Auction, Sales Promotion, Karaoke, Meeting, Music, and More...)

MODEL AP1O-K

FREQ RESP + / -3DB 37 - 20 kHz
SENSITIVITY 1 W @ 1 M 99dB
PEAK SPL 130 dB
SYSTEM IMPEDANCE 8 Ohm
POWER RATING PEAK 550 Watt
POWER RATING CONTINUOUS 250 Watt
Frequency Range ( -10 dB) 39 Hz -20 kHz
SYSTEM TYPE 10" , 3 - Way
LOW PASS ( Hz) 2.5 kHz
HIGH PASS FILTER( Hz) -
FINISH MATERIAL Plywood Black
TRIPOLE STAND BOTTOM No
TRIPOLE STAND TOP No
Mounting Holes Yes
CONNECTORS INPUT Standart
-
CONNECTORS OUTPUT
WEIGHT NET ( KG) 12 Kg/ Pcs
WEIHT GROSS ( KG) 13 Kg/ Pcs
DEMENSIONS ( MM)
HEIGTH 295 MM
WIDTH 510 MM
DEPTH 285 MM

MIC CABEL SHURE Beta58

The Shure Beta 58A® is a high-output supercardioid dynamic vocal microphone designed forprofessional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide.
The Beta 58A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille.
Features:
* Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
* Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound
* Neodymium magnet for high signal-to-noise output
* Hardened steel mesh grille that resists wear and abuse
* Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
* Minimally effected by varying load impedance
* Legendary Shure quality and reliability

Specifications:
Type: Dynamic ( moving coil)
Frequency Response: 50 to 16, 000 Hz
NOTE: The curve above shows on-axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.
Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.
Output Level ( at 1, 000 Hz) : Open Circuit Voltage: -51.5 dBV/ Pa* ( 2.6 mV)
* 1 Pa = 94 dB SPL
Impedance: Rated impedance is 150 ohms ( 290 ohms actual) for connection to microphone inputs rated low Z Phasing. Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.
Case: Silver blue enamel-painted die cast metal with hardened, matte-finished, spherical steel mesh grille.
Adjustable, Stand Adapter: Slip-in microphone mounting, unbreakable, adjustable through 180 degrees with standard 5/ 8" -27 thread, black finish.
Dimension: See User Guide.
Net Weight: 278 grams ( 9.92 oz)