Keterangan :

PAKET KARAOKE M: BMB + 2 SPEAKER BMB + MIC KABEL SHURE

1 UNIT MIXER AMPLIFIER BMB DA-2700DSP
2 UNIT SPEAKER BMB CS-455R, 10 INCH
2 UNIT MIC KABEL SHURE BETA58
1 SET STAND TRIPOT/ BRACKET GANTUNG SPEAKER
1 ROLL KABEL SPEAKER TOYO 2X80 ( @ 35 METER)
2 SET KABEL MIC CANARE @ 5 METER

MIXER AMPLIFIER BMB DA-2700 DSP SYSTEM

Special Features
* 185 Watt x 2 channel stereo amplifier.
* Two microphones can be used simultaneously.
* Low-impedance compatible power amplifier configuration that can drive two sets of speakers simultaneously.
* Easy to sing high perfomance digital echo.
* Digital Key controller Menu system
* Remote Controller ( Control of MASTER VOL and selector MUSIC INPUT A or B, Mode, Menu/ KEY CONTROLLER, Echo Vol Control , Repeat , Delay, Down and Up) .

Specifications:
RMS Output : 185 Watt + 185 Watt
Mic Input Sensitivity : 9mV
External Devices Sensitivity : 250mV
Signal/ Noise Ratio ( with IHF A Filter) : 85dB
T.H.D. : 0.1%
Frequency Band : 10Hz - 40kHz
MIC Tone Adjustment :
..... LO : 80Hz + 15dB
..... MID : 1.2kHz + 8dB
..... HI : 10Hz + 15dB
Music Tone Adjustment :
..... LO : 80Hz + 9dB
..... MID : 1.2kHz + 6dB
..... HI : 10Hz + 9dB
ECHO Tone Adjusment :
..... LO : 80Hz + 15dB
..... HI : 10Hz + 15dB
Power source : AC 220V/ 50Hz
Electric Consumption : 480 Watt
Weight : 12 Kg
Dimension ( mm) : 424 ( W) x 368 ( D) x 132 ( H)
Warranty : 1 Year

SPEAKER BMB CS-455R, 10 INCH

Specifications:
Type : 2 Way 3 speaker system, Bass reflex type
Mounted drivers :
..... Woofer : 254 mm cone type
..... Tweeter : 76 mm cone type x 2
Impedance nominal : 8 Ohm
Frequency Response : 48 Hz to 20 kHz
Sensitivity : 91 dB
Maximum Input Power : 500 Watt
Nominal Input Power : 180 Watt
Crossover Frequency : 3 kHz
Speaker : Anti-magnetic Type
Dimensions : 509 mm ( W) x 291 mm ( H) x 269 mm ( D)
Weight : 12.5 Kg/ pcs
Warranty : 3 Years

MIC CABEL SHURE Beta58

The Shure Beta 58A® is a high-output supercardioid dynamic vocal microphone designed forprofessional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide.
The Beta 58A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille.
Features:
* Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
* Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound
* Neodymium magnet for high signal-to-noise output
* Hardened steel mesh grille that resists wear and abuse
* Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
* Minimally effected by varying load impedance
* Legendary Shure quality and reliability

Specifications:
Type: Dynamic ( moving coil)
Frequency Response: 50 to 16, 000 Hz
NOTE: The curve above shows on-axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.
Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.
Output Level ( at 1, 000 Hz) : Open Circuit Voltage: -51.5 dBV/ Pa* ( 2.6 mV)
* 1 Pa = 94 dB SPL
Impedance: Rated impedance is 150 ohms ( 290 ohms actual) for connection to microphone inputs rated low Z Phasing. Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.
Case: Silver blue enamel-painted die cast metal with hardened, matte-finished, spherical steel mesh grille.
Adjustable, Stand Adapter: Slip-in microphone mounting, unbreakable, adjustable through 180 degrees with standard 5/ 8" -27 thread, black finish.
Dimension: See User Guide.
Net Weight: 278 grams ( 9.92 oz)