Selamat Datang!
Gabung Sekarang
|
Masuk
Menu Anggota
|
Bantuan
|
0
SEMUA
PRODUK
JUAL
BELI
PERUSAHAAN
Mengenalkan Indotrade.co.id kepada teman
*
artinya harus diisi
*
Nama Anda:
*
Email Anda:
*
Email Teman Anda: :
Untuk mengirim lebih dari satu orang, pisahkan setiap email dengan koma.
Contoh: nama1@domain.co.id, nama2@domain.co.id dan seterusnya
*
Pesan:
Halo, Saya Pebisnis Saya mengenal produk ini dari https://www.indotrade.co.id dan saya lihat hal ini mungkin berguna untuk anda. ------------------------------------------------------- Foam Fomtec AFFF 6% Foam Fomtec AFFF AFFF 6% Fomtec AFFF 6% is intended for use on class B hydrocarbon fuel fires such as oil, diesel and aviation fuels. It can be used with both aspirating and non-aspirating discharge devices. The product is approved EN 1568 and Lloyds regsiter for use on board ships according to the IMO/ Solas regulations. Fomtec AFFF 6% is especially suited whenever rapid fire knock-down is essential. It is compatible with all dry chemical powders and can be used in powder/ foam twin agent systems. Description Fomtec AFFF 6% is an aqueous film forming foam concentrate ( AFFF) consisting of fluorocarbon and hydrocarbon surfactants blended with various solvents, preservatives and stabilisers. The foam forms an aqueous film that rapidly cuts off the oxygen supply and thus knocks down the fire. The expanded foam from which the film is drained forms a stable blanket that suppresses the release of flammable vapours and cools down the fuel surface extinguishing the fire and preventing re-ignition. The low surface tension of the water foam concentrate solution enables the aqueous film, although heavier than the burning liquid, to float on top of the liquid surface. Fomtec AFFF 6% should be used at 6% proportioned solution ( 6 part concentrate in 94 parts of water) in fresh or seawater. It may also be stored as a pre mix solution in fresh water. Application Fomtec AFFF 6% is intended for use on class B hydrocarbon fuel fires such as oil, diesel and aviation fuels. It can be used with both aspirating and non-aspirating discharge devices. Fomtec AFFF 6% is especially suited whenever rapid fire knock-down is essential. It is compatible with all dry chemical powders and can be used in powder/ foam twin agent systems. Fire Performance & Foaming The fire performance of Fomtec AFFF 6% has been tested and documented according to the UK Ministry Of Defence Standard 42/ 40 and EN 1568 Part 3 at 6% proportioning. Foaming index no less than 7: 1 ( normally 8: 1) . 25% drainage time 3.0 minutes ( normally 3.5) . Technical data Appearance : Clear Amber Liquid Specific gravity @ 20° C : 1.005 + / - 0.01 g/ ml Viscosity approx @ 20° C : < 20 cSt pH : 7.5 + / - 1.0 Freezing point : - 3° C Pour point : - 2° C Suspended sediment ( v/ v) : Less than 0.2% Surface tension approx : 20.0 dynes/ cm Packaging We supply Fomtec in 25 litre cans and 200 litre drums. We can also ship in 1000 litre containers or in bulk. International Approvals Fulfills the requirements of the following standard: l EN 1568, part 3 l Lloyds Register of Shipping l Bureau Veritas Untuk informasi selengkapnya, silahkan ke http://www.indotrade.co.id/alat-teknik/3192455
0.0071 194.163.150.105