AEMC 3711 2117.60 Clamp-on Ground Resistance Tester

Harga:

27.000.000,-

Jumlah Pesanan:

The Clamp-on Ground Resistance Tester Model 3711 measures ground rod and small grid resistance through any season, without the use of auxiliary ground rods.
Clamp-on Ground Resistance Testers are used in multi-grounded systems without disconnecting the ground under test. The Model 3711 simply clamps around the ground conductor or rod and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured.

Features:
Simple and fast clamp-on operation - no leads, no auxiliary rods or spacing requirements. No need to disconnect neutral service
Direct reading of ground resistance from 0.01© to 1200©
Direct reading of continuity and ground loop resistance
Direct reading of ground leakage or phase current from 1mA to 30Arms
Jaw design with large 1.25 " ( 32mm) window - accommodates up to 1000MCM cables
Auto-off for power management
CE Mark and UL approved
Rugged Lexan head and body construction resists breakage
Patented design
Includes hard carrying case, batteries, 25© calibration check loop, and manual

Specifications:
Resistance Measurement Frequency : 2403Hz
Current Measurement Frequency : 47 to 800Hz
Current Overload : OL displayed above 29.99Arms
Power Source : 9V Alkaline battery ( IEC 6LF22 or NEDA 1604A)
Battery Life : Typical: 8 hours or approx. 1000 measurements of 30 seconds
Dimensions : 9.25 x 3.94 x 2.17 " ( 235 x 100 x 55mm)
Weight : 2.2 lbs ( 1kg)

Kenalkan ke teman Anda