Model : 6350 pH, ORP, Conductivity, Salinity, Temperature Portable Meter
Description
The Jenco 6350 is a high performance pH/ Conductivity/ Salinity/ mV/ Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any IBM compatible PC. This meter is CE approved and features 0.01 pH Resolution and a mV range of ± Salinity is in the range of 0.0 to 80.0 ppt with a 0.0 ppt resolution. Conductivity Cells are selectable for K= 1.0 or K= 5.0 and ranges are selectable for uS or mS.
• pH buffer recognition: model 6350( pH: 7.00, 4.01, 10.01) , model 6350c( pH: 6.86, 4, 9.18)
• Selectable 2/ 4 wire cells for long cable length & wide measurement range
• Store 50 sets of data in non-volatile memory
• Conductivity auto/ manual range
• Power down memory backup
• Splash resistant/ watertight case
• Audio feedback keys
• Battery/ ac adaptor
• RS-232c output

Specifications :
pH -2.00 to 16.00pH 0.01 pH ± 0.01 pH ± 1 LSD
ORP -1500 to 1500 mV 1 mV ± 0.01 % ± 1 LSD
Cond., K= 1.0 0 uS/ cm to 30.00 mS/ cm ( K= 1.0 over 4 ranges) 0.01 uS/ cm to 0.01mS/ cm ( K= 1.0 over 4 ranges) ± 0.5% FS
Cond., K= 1.0 0 to 99.99 uS/ cm 0.01 uS/ cm ± 0.5% FS
Cond., K= 1.0 0 to 999.9 uS/ cm 0.1 uS/ cm ± 0.5% FS
Cond., K= 1.0 0 to 9.999 mS/ cm 0.001 mS/ cm ± 0.5% FS
Cond., K= 1.0 0 to 30.00 mS/ cm 0.01 mS/ cm ± 0.5% FS
Cond., K= 5.0 0 uS/ cm to 200.0 mS/ cm ( K= 5.0 over 4 ranges) 0.1 uS/ cm to 0.1 mS/ cm ( K= 5.0 over 4 ranges) ± 0.5% FS
Cond., K= 5.0 0 to 499.9 uS/ cm 0.1 uS/ cm ± 0.5% FS
Cond., K= 5.0 0 to 4999 uS/ cm 1 uS/ cm ± 0.5% FS
Cond., K= 5.0 0 to 49.99 mS/ cm 0.01 mS/ cm ± 0.5% FS
Cond., K= 5.0 0 to 200.0 mS/ cm 0.1 mS/ cm ± 0.5% FS
Salinity 0.0 to 80.0 ppt 0.1 ppt ± 1% FS
Temp. -5.0 to 75.0 Centigrade 0.1 Centigrade ± 1 Centigrade

#

pH
• pH buffer recognition: Model 6350 : pH 7.00, 4, 10.01, model 6350c: pH 6.86
• pH temp. compensation: Auto / manual -5.0 to 75.0 centigrade
• pH buffer temp. range: 0-60 centigrade
• pH electrode offset recognition: ± 100 mV at pH 7.00 ± 108.3mV/ -91.7 at pH 6.86
• pH electrode slope recognition: ± 30% at pH 4.00, 4.01, 9.18 & 10.01
• Input impedance: > 10exp( 12) ohms
Conductivity
• Conductivity reference temp.: 15.0-25.0 centigrade ( key selectable)
• Conductivity temp. coefficient: 0.0% -4.0% ( key selectable)
• Cell constant: 1cm exp( -1) -5 cm exp( -5) ( key selectable)
General
• Keys: Audio feedbackup in all keys
• Communication: RS-232c compatible db9 connector
• Battery life: > 10h alkaline( continuous opersation)
• Power: battery/ adaptor: 6AAA/ 9V AC( 230v/ 115v) adaptor
• ATC probe: Thermistor, 10k ohms at 25 centigrade
• Ambient temp. range: 0-50 centigrade
• Display: 15mm high/ 8.7mm high
• Dimensions: 241mm x 83mm x 71mm
• Weight: 470 g( including batteries)