Specification :
YPA M602 condenser instrument microphone
Microphone Type
Condenser ( electret bias)
Polar Pattern
Cardioid ( unidirectional) , symmetrical about axis
Frequency Response
40 to 18, 000 Hz
Polarity
Positive pressure on diaphragm produces positive voltage
on pin 2 relative to pin 3 of microphone output connector
Output Impedance ( at 1000 Hz)
600 ohms
Sensitivity ( at 1000 Hz)
-48 dBV/ Pa, ( 4.0 mV) , 1 Pascal = 94 dB SPL
Electromagnetic Hum Sensitivity
-7 dB equivalent SPL in a 1 millioersted field ( 60 Hz)
Switch
Built-in On/ Off switch
Recommended Input Load Impedance
800 ohms minimum
Output Clipping Level ( 1 kHz, 1 % THD)
2000 ohm load
-13 dBV ( 0.22 V) ( phantom)
-17 dBV ( 0.14 V) ( battery)
Maximum SPL
2000 ohm load: 131 dB ( phantom) , 127 dB ( battery)
Self-Noise ( Equivalent SPL)
20 dB typical, A-weighted
Dynamic Range ( maximum SPL, 2k ohm load, to A-weighted noise level)
111 dB ( phantom) ; 107 dB ( battery)
Signal-to-Noise Ratio
68 dB ( IEC 651) * at 94 dB SPL
Power
Phantom Power
Supply Voltage: 11 to 52 Vdc
Current Drain: 2.0 mA max at 52 Vdc
Maximum External Voltage Applied to Pins 2 and 3 with respect to
Pin 1: + 52 Vdc
Reverse polarity protected to: 100 Vdc
Battery Power
Recommended: 1.5 V alkaline AA size ( NEDA 15A)
Life: up to 10, 000 hours
Connector
Three pin professional audio connector ( male XLR type)
Case
Steel and brass construction with black painted finish
Environmental Conditions
This microphone operates over a temperature range of -29 to 57
degrees Celsius ( -20 to 135 degrees Fahrenheit) , and at a relative
humidity of 0 to 95% .
Weight
Net: 250 g ( 8.8 oz) less battery
Packaged: 880 g ( 1 lb 15 oz)