Specification :
WZ30-25 7 ton 0.96 m3 backhoe loader with 4 combine in 1 bucket
Performance Characteristics
Backhoe Loader in Chinese home, people calls its figure land generally " both ends is busy " .
Because it has a unique structure, the front is loaded device, back to digging. On site, you only need to
rotate the seat to change the role from loader to
the excavator. Backhoe Loaders are mainly used for urban and rural road construction and maintenance,
cable casting , power and airport projects, municipal construction, water conservancy construction,
rural housing construction, stone mountains
and a variety of small construction teams are engaged in various construction projects .
Cab
Cab can be replaced independently, it connects with excavator frame by four damping devices,
backhoe side turned to the big window structure is conducive to broadening their horizons and
ventilation, indoor with a strong air-conditioning system, during hot and cold environment, comfortable working, multi-band car radio, mp3 players, car stereo allows you to work more enjoyable. Easy to operate the
hydraulic tank, fuel tank, they are also independently replaceable, and are in low places,
which will help bringing down the machine center of gravity,
improving stability and suitably for standing on the ground for oil filling and maintenance,
at the same time, they also are part of the boarding ladder.
legs, independent control of left and right legs can make the machine on slopes or rough terrain easily get
on the horizontal position.
Working device:
Load-side adopts a unique eight-bar linkage that automatically keep the bucket level when the loading arm lift bucket to
keep the original angle, to ensure that the material will not be spilled. According to need,
you can also add some attachments, such as a multi-bucket, fork, log grappler and so on.
Travel System:
Travel System adopts hydrostatic drive. Using German technology shift driven front axle.
Hydraulic System:
Main pump adopts Germany Rexroth pump technology, Chinese wellknown enterprises produce the pump.
All excavators adopts open hydraulic system, with good micro performance, and make the operation much stabler, easier, more responsive, more accurate tap control,
to maximize power and improve fuel efficiency.
Power system
The engine adopts the YTO Group Corporation and RICARDO designed classic model - LR4105ZG96, maximum output power is 65KW. T
According to the needs of users, Cummins engine is optional, B3.3T-C80, power is 60 kw. You may also choose Yanma, Perkins engine and so on.
Weight 7900 ( kg)
Overall dimensions ( L* W* H) 5600* 2200* 2700 ( mm)
Bucket width 700 ( mm)
Digging bucket capacity 0.25 ( m³ )
Wheel base 2300 ( mm)
Mini. ground clearance 250 ( mm)
Loading bucket capacity 0.96 ( m³ )
Max. dump height 2600 ( mm)
Dump distance 700 ( mm)
Max.dumping height 2600 ( mm)
Dumping reach 700 ( mm)
Any place unload degree 45 ( ° )
Max. raise force 47 ( kN)
Mix. swing radius 6000 ( mm)
Max. digging depth 3500 ( mm)
Max. digging radius 5600 ( mm)
Max. grade ablity 20 ( ° )
System pressure 21Mpa
Engine information
Model YTR4108T66AY
Rated power 65 ( KW)
Rated speed 2200 ( r/ min)
Type specifiction
Front tyre 10-16.5
Rear tyre 15-19.5