Selamat Datang di Indotrade.co.id
Masuk | Daftar
Bahasa:
Anggota Prioritas Prioritas Indotrade
Tahun ke-16
Timbangan Indonesia
Timbangan Indonesia
http://indotrade.co.id/timbanganindonesia/

ATEX products

ATEX products
Industrial crane scales for use in areas classified as hazardous ( Zone 1 and 2) in accordance with Ex II 2G IIC T4 X protection
LITTLE SPACE IS TAKEN UP allowing the best use of the lifting devices.
Predisposed for an upper connection ring and lower hook


Visit Our Website at: http://timbanganindonesia.com
Timbanganindonesia.
Contact Person: Adi Firo, Ibu Sri (08159072797,087883976262,081387428586,085883946322)
Address: Jl. Revolutionary Hero No. 22B.
Tel. 62-21-8611 131, 8611 259, 8611 444, 8611449
Fax: 62-21-8611 207.
EMAIL: sales@timbanganindonesia.com
Website: wwwtimbanganindonesia.com
Pilih Kotak Centang dan klik   atau   atau 
GaleriBaris
Tampilkan di setiap halaman
menampilkan 1-20 dari 30
TPWX2GDI " HAZARDOUS ZONE" SERIES STAINLESS STEEL ATEX PALLET TRUCK SCALE
Pallet truck scales, with built-in electronic weighing, for dangerous areas classified as hazardous ( ZONES 1 and 21 & 2 and 22) in accordance with Ex II 2GD IIB T4 T197Â ° C X.
....
TPWX3GDI " HAZARDOUS ZONE" SERIES STAINLESS STEEL ATEX PALLET TRUCK SCALE

Harga : Hubungi Kami

Timbangan truk Pallet, dengan timbangan elektronikyang built-in atau jadi satu, cocok untuk kondisi kerja keras dan daerah berbahaya. diklasifikasikan sebagai berbahaya ( ZONA 2, ....
MCW ATEX SUSPENDED CRANE SCALES
Industrial crane scales for use in areas classified as hazardous ( Zone 1 and 2) in accordance with Ex II 2G IIC T4 X protection
LITTLE SPACE IS TAKEN UP allowing the best use of....
TPWX3GD " HAZARDOUS ZONE" SERIES ATEX PALLET TRUCK SCALE
Pallet truck scales, with built-in electronic weighing, suitable for harsh working conditions and dangerous areas classified as hazardous ( ZONE 2, 22) in accordance with Ex II....
TPWX2GD " HAZARDOUS ZONE" SERIES PALLET TRUCK SCALE ATEX
Pallet truck scales, with built-in electronic weighing, for dangerous areas classified as hazardous ( ZONES 1 and 21 & 2 and 22) in accordance with Ex II 2GD IIB T4 T197Â ° C X
....
T SERIES SINGLE CELL PLATFORMS
Small and medium capacity electronic platforms with a stainless steel surface having a precise and sturdy structure, suitable for creating scales and automatic weight checking....
CP SERIES LOW PROFILE LOAD CELLS

Harga : Bersaing daan berkualitas

Stainless steel compression load cells suitable for weighing tanks and hoppers with the relevant accessories.

MAIN FEATURES:

LOW PROFILE

STAINLESS STEEL CONSTRUCTION

....
LTF " PROFESSIONAL" SERIES WEIGHING KIT FOR LIFT TRUCK FORKS
Pair of weighing forks for lift trucks with FEM2A ( up to 2500 kg) or FEM3A ( up to 5000 kg) plates. Very easy to install, not entailing any reduction of the lift truck capacity.....
LP SERIES LOW PROFILE PLATFORMS
Low profile platforms suitable for weighing trolleys, pallet trucks, etc.; fitted with sideboards and an on/ off ramp. Suitable for creating scales and electronic weighing systems....
ESW SERIES IRON-WEIGHING SCALES
Multipurpose iron-weighing scales, suitable for weighing metal sections, rods, pipes, and plates in industrial and commercial applications. The standard version is manufactured....
DLW SERIES AUTOMATION WEIGHING FOR + / - WEIGHT CHECKING

Harga : -

Kompak, handal dan akurat + / - sistem pemeriksaan berat badan, cocok untuk diintegrasikan dengan produksi dan / atau pengiriman baris konveyor untuk pemeriksaan berat yang....
EPFL " EASY-PESA FLOOR" SERIES FLOOR SCALES
Simple to use, high performance, multipurpose floor scales for industrial and commercial use. Manufactured according to OIML R-76 / EN 45501 standards. Available also CE-M....
ELP SERIES LOW PROFILE FLOOR SCALES
Easy to use and clean, low profile multipurpose scales, are especially suitable for weighing carts, pallet truck scales, and wherever one does not want to install a standard flush....
SPO SERIES SINGLE POINT LOAD CELLS
Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 300x300 mm.

MAIN FEATURES:

C3....
" MB4" PASSIVE SAFETY ZENER BARRIERS,  FOR ATEX ENVIRONMENTS
KIT of three intrinsic protection zener barriers, for connection of devices en ATEX area with devices in safe area. Suitable for mounting on a panel board on an omega bar in a....
SPSC SERIES SINGLE POINT STAINLESS STEEL LOAD CELLS
Stainless steel load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 600x600 mm.

MAIN FEATURES....
SPSB SERIES SINGLE POINT STAINLESS STEEL LOAD CELLS
Stainless steel load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 400x500 mm.

MAIN FEATURES....
SPBC SERIES SINGLE POINT LOAD CELLS
Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 700x700 mm.

MAIN FEATURES

C3 PRECISION....
SPG SERIES SINGLE POINT LOAD CELLS
Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 400x400 mm.

MAIN FEATURES

C3 PRECISION....
SBK5000-1KL SERIES IP68 STAINLESS STEEL SHEAR BEAM LOAD CELLS
Stainless steel shear beam load cells suitable for building, for example, CE-M approved scales with 4 load cells or for weighing tanks and hoppers with the relevant accessories

....
PertamaSebelum - 12 - BerikutTerakhir