PT. Taharica ( Distributor, Agent, Service)

OGURA INDONESIA.

CLUTCH & BRAKE UNITS.

1. MIC-N Electromagnetic Clutch ( Torque Range: 2~ 7in-lbs / 0.25~ 0.8Nm)
Small clutches for use in copy machines, printers, and other peripheral devices. One piece assembly features a custom molded gear or timing pulley designed for your specification. Most clutches use a permanent magnet to disengage the armature when it is not in use. All clutches are bi-directional.

2. AMC Electromagnetic Clutch ( Torque Range: 2~ 70in-lbs / 0.25~ 8Nm)
Clutch designed for general industrial use. Clutches are designed with zero backlash armatures and a double ball bearing field support to provide longer life and better performance versus bushing style units.

3. TMC Electromagnetic Clutch ( Torque Range: 4~ 147ft-lbs / 6~ 200Nm) .
Clutch designed for general industrial use. Compact design with a thin overall profile. Zero backlash armatures can be built into custom hubs. Clutches are available with bearing supported field or a ( no bearing) flange field.

4. VC Electromagnetic Clutch ( Torque Range: 4~ 44 ft-lbs / 6~ 60Nm)
Clutch designed for general industrial applications. Units come standard with zero backlash armature. Units are normally produced in a high torque version but a lower torque is also available which reduces the overall length of the clutch by 15% . Options for this unit include an automatic air gap that adjusts as the clutch wears, a quiet armature option that reduces clutch engagement noise for application in hospitals or offices and a 1 piece designed option that simplifies mounting.

5. CT Electromagnetic Clutch ( Torque Range: 20~ 150ft-lbs / 27~ 203Nm)
Clutch is designed for general industrial use. Clutches are dimensionally interchangeable with poular competitors' units. Clutches use stainless steel hubs to break up residual magnetism and reduce the chance of corrosion. Patented automatic adjustment for wear allows consistent stop times over the life of the unit. Armature design allows for excellent heat dissipation. Screw terminals come with optional terminal cover for hard wire connections.

6. MMC Electromagnetic Clutch ( Torque Range: 37~ 1475ft-lbs / 50~ 2000Nm)
Heavy duty clutches best suited for marine and mobile applications. Bi-directional spring resists engine vibration and shock. Output can be modified to meet your requirement, or clutch can be purchased with armature only to bolt into your hub.

7. AMB Electromagnetic Brake ( Torque Range: 2~ 70in-lbs / 0.25~ 8Nm)
Brake designed for general industrial application units feature zero backlash, armature hub, and field assemblies that can accommodate bearings for additional shaft support.

8. TMB Electromagnetic Brake ( Torque Range: 4~ 147ft-lbs / 6~ 200Nm)
Brake is designed for general industrial use. Low inertia zero backlash armature can be bolted to your hub. Brake can be supplied with internal or external hub depending upon overall length restrictions.

9. VB Electromagnetic Brake ( Torque Range: 5~ 44ft-lbs / 7~ 60Nm)
Brake designed for general industrial applications. Units come standard with zero backlash armature. Units are normally produced in a high torque version but a lower torque is also available which reduces the overall length of the clutch by 15% . Options for this unit include an automatic air gap that adjusts as the clutch wears, a quiet armature option that reduces clutch engagement noise for application in hospitals or offices and a 1 piece designed option that simplifies mounting.

Distributor ogura clutch & brake, agent ogura clutch & brake, penjualan clutch & brake. Installation clutch & brake ogura. Jakarta - Indonesia.

Jl. Pahlawan Revolusi No. 22B
Jakarta 13430 – Indonesia
Phone: + 62 21 8611 259, 8611 449, 8611 444 ( hunting)
Fax: + 62 21 8611 207
Email: sales@ taharica.com
Website: www.taharica.com