Katalog Produk

Keterangan

Lighting
RMS 550
Lighting
RMS 550
Due to the body in Stainless Steel AISI 304, with a tempered glass
window and a glass-frame done in one unit without welding, RMS
series are ideal for Onshore, Offshore, Marine applications and for
all kinds of industry where a high level of corrosion resistance is
required. Moreover, the shapes of RMS lighting  xtures have been
designed to allow the operator to work with no need to support any
part of lighting  xtures. One person can take care of start-up or
maintenance of a RMS lighting  xture without any assistance.

Specifications

Material Stainless Steel AISI 304, 0.8 mm thickness and
transparent part in tempered glass
IP Rating IP66/ 67

Temperature -30° C to 55° C
Certification Type Examination Certi cate INERIS 01ATEX3002X
& Approvals GOST Certi cate     IT.  04. 00509

Standards
EN 60079-15 / EN 60079-0 / EN 61241-0 / EN 61241-1
IEC 60079-15 / IEC 60079-0 / IEC 61241-0 / IEC 61241-1

Ex-code

II 3 GD
Ex nA II T5 Tamb. -30° C to 50° C
Ex nA II T4 Tamb -30° C to 55° C
Ex tD A22 T90° Tamb -30° C to 40° C
Ex tD A22 IP66/ 67 T100° Tamb -30° C to 50° C
Ex tD A22 IP66/ 67 T105° Tamb -30° C to 55° C
According to European Directive 94/ 9/ EC ( ATEX)
For Zone 2 and Zone 22
Gaskets Special cross section tightness gasket, silicon rubber made ( close cells) located in housing channel between
body and window frame.
Entries Body complete of two diam. 21mm through holes for cable entries, one complete of metallic plug with lock nut
and gasket, and the other one with plastic plug for dust protection.
Hardware and Screw AISI 304 Stainless Steel external hardware and screws
Lamps RMS Series is suitable for two pins  uorescent lamps G13 socket PHILIPS TL-D or equivalent.

( lamps excluded)
Lamps Wattage 18 / 36 W
Ballast High-frequency electronic ballast conforming with EN 60079-15 and IEC 60079-15
Rated operation 220-240 V

voltage ( UE)
Frequency 50 ÷ 60 Hz
Power factor > 0, 95
Accessories Suspension mounting kit “ G1� AISI 304 made
Available upon Pole mounting kit “ P12� 1 ½ � size AISI 304 made

request

Wall mounting kit “ H1� AISI 304 made
Emergency Service RMS 550 lighting  xtures for Emergency Service are available:
RMS 550...PNL/ LE-P

Note
Very low pollution at the end of operative life time of lighting fixtures. The inorganic materials used for RMS, like
stainless steel and glass, allow a recycle of 95% , only electrical components and insulation of single core wires need
some more care.

No through holes between inside and outside of luminaries, out of holes for power supply cable whatever protected
by a suitable waterproof cable gland ( on request) . Therefore, during the time, release would be possible where, for
fixing devices, there are through holes and relevant gaskets.