PT. PURNAMA LABORATORY

Keterangan :

New from A& D - The MS-70 / MX-50 / MF-50 Moisture Analyzer offering the latest in weighing technology implementing the Super Hybrid Sensor with moisture balance features that outshine the competition. Choose from three affordably priced models, designed to streamline the process of product moisture analysis. Additional uses include moisture analysis in the environmental, chemical, pharmaceutical industries, and more.

The innovative Heat Chamber houses a 400 Watt Halogen heating lamp producing fast and accurate results aided by its uniquely designed SRA ( Secondary Radiation Assist) Filter, which serves to radiate heat uniformly, protect the lamp from splatter during testing and provide a Progress Monitoring Translucent Glass Window. The SRA filter is easy to clean ensuring optimum performance while the halogen lamp is user replaceable. This of course will save time and money and minimize down time and labor costs.

In-house tests put the MX-50 at the top of the league for accuracy in giving Sodium Tartrate a reading of 15.66% ( + 0.3/ -0.1) moisture content with repeatability of 0.01% ( S.D.) , In-house factory tests comparing the top competing models, put the MX-50 at the top for accuracy using Sodium Tartrate as the standard. Repeatable readings of 15.66% ( + 0.3/ -0.1) moisture content with repeatability of 0.01% were established.

The Vacuum Fluorescent Display allows the results to be clearly displayed even in areas with poor lighting. The large keypads and intuitive embedded software makes the A& D MS/ MX/ MF moisture balance a breeze to use walking you through the convenient test setup parameters.

Attention to the placement of handles make the unit safe to use minimizing burn related mishaps.

Add it all up and A& D is Clearly a Better Value over all the other moisture balances on the market today!

Sodium Tartrate Dihydrate is included for verifying the performance any of the A& D moisture analyzers. Sodium Tartrate Dihydrate is a chemical used in the industry as a standard since it contains 15.66% of a chemically uniform moisture. However, depending on the state of the preservation of the material the moisture of 0.09% or less adheres to the surface of it.

Checking the performance of the moisture balance is simple. Preheat the unit for about eight minutes at 160° C, then put about 5 grams of Sodium Tartrate Dihydrate in the moisture balance. The moisture content rate of 15.50 - 16.00% is obtained in a typical measurement.
moisture balance determines percent solids
Click For Hi-Res Image
60 month warrantyAll A& D Moisture Analyzers come with data acquisition software for exporting data to a computer via the RS-232 interface. The MF-50 comes standard with the WinCT balance communication software for exporting weighing result to a MS Word or Excel.

The MS-70 & MX-50 comes with Win CT Moisture ( optional for the MF-50) . Win CT Moisture exclusive Optimum Temperature Search ( OTS) program is designed to display a graph of the moisture content rate change while measuring and makes it easier to set an appropriate analyzing mode setting with a connected PC. Users no longer have to go through a tedious trial and error process to determine optimum temperature and time for quick accurate analysis.

Typically it takes days of trial and error to find optimal sample parameters. In just one 30-minute sample run, OTS automatically recommends the ideal time and temperature for a sample type. Because the OTS program helps the user distinguish between desired drying of moisture vs. the undesirable burning of the sample, OTS ensures quick accurate readings every time.

In addition to OTS, WinCT-Moisture provides bidirectional data collection, graph time vs. moisture % and overlays multiple test graphs in different colors to visually compare results. Data can be exported to ExcelT or sent as an email attachment.

The MX-50 can also be purchased with an optional Certified Temperature Calibrator ( ONLY available for the MX-50 Moisture Balance) . Calibration results can be output in the format that conforms to GLP, GMP, ISOC.

All A& D moisture analyzers measure moisture thermogravimetrically. Thermogravimetric moisture analysis is based on the principles of vaporization of water during the during process. The moisture balances monitors the weight loss of a sample as the material is heated. The sample weight prior to heating and after reaching a steady-state mass after drying determines the moisture content. The halogen bulb produces the heating of the sample by infrared radiation. The thermogravimetric method offers advantages over moisture determination using a chemical method such as Karl Fisher Titration. Thermogravimetric moisture analysis is simple to perform and adaptable to many conditions verses Karl Fisher Titration can be subjective, and require the handling and disposal of solvents and potentially hazardous materials.

A& D technology increases your productivity

* Fast heat to 200° C in only 2 minutes
* Uniform heating drastically improved by SRA technology
* SRA filter stops contamination from spatter of the test sample
* Removable SRA filter makes for easy cleaning
* User replaceable Halogen lamp cuts cost and down time
* GLP compliant format when printed results are required

A& D know-how gives superior analytical performance

* Repeatability of 0.01% ( S.D.) in moisture determination
* High accuracy gives value of Sodium Tartrate Dihydrate at 15.66% ( + 0.3/ -0.1)
* 50 gram capacity by 1mg readability
( MX-50 readability to 1mg while MF-50 is 2mg)
* Programmable Heating Mode Memory
* Easy to read Vacuum Fluorescent Display
* Standard RS232 port for connection to computer or optional printer.

Progress window for heating check
Heating process can be checked through translucent window Easy handling of the unit
Ergonomically designed pan handle eliminates mishaps such burns when moving a hot sample tray into or out of the unit from either side.

Display Mode give you the choice of % moisture, % solids, weight, atro moisture or atro solids

PLEASE CONTACT US FOR COMPLETED BROCHURE