Desal AG4040F GE Osmonics Membrane
Desal AG4040F GE Osmonics Membrane | phone 021 84937329 | Fax 021 84937606 | Email sales@ profilterindonesia.com | Desal AG4040F GE Osmonics Membrane | Desal AG4040F GE Osmonics Membrane | Desal AG4040F GE Osmonics Membrane | Desal AG4040F GE Osmonics Membrane | Desal AG4040F GE Osmonics Membrane | Desal AG4040F GE Osmonics Membrane | Desal AG4040F GE Osmonics Membrane | Desal AG4040F GE Osmonics Membrane | Desal AG4040F GE Osmonics Membrane
Desal AG4040F
Brackish Water Desalination Reverse Osmosis, High Rejection
The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig ( 1, 379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry. AG4040FF High Rejection Brackish Water elements feature a FRP outerwrap and 27 mil feed spacers. This element is designed with male end connections.
Element Specifications
Model : AG4040F
Flow : 2, 200 GPD ( 8.3 m3/ d)
Active Area : 85 ft2 ( 7.9 m2)
Avg. Rejection : 99.5%
Min. Rejection : 99%
Specifications are based on a 2000 mg/ L NaCl solution at 225 psig operating pressure ( 1551 kPa) , 77° F ( 25° C) , 15% recovery, pH 7.5 after 24 hours. Individual flux may vary + 25% / -15%
Operating and Design Parameters
Membrane : Thin Film Membrane ( TFM® )
Typical Operating Pressure : 200 psig ( 1, 379 kPa)
Maximum Pressure : 600 psig ( 4, 137 kPa)
Maximum Temperature : 122° F ( 50° C)
Chlorine Tolerance : 1, 000 ppm-hrs, dechlorination recommended
Optimum Rejection pH : 7.0 -7.5
Operating pH Range : 4.0 - 11.0
Cleaning pH Range : 2.0 - 11.5
Maximum Pressure Drop : 10 psig ( 69 kPa) per element , 50 psig ( 345 kPa) per vessel
Feed NTU :
Prioritas Indotrade Tahun ke-13
www.profilterindonesia.com
