Desal AG4040TF Brackish Water Desalination Reverse Osmosis, High Rejection[13 Aug. 2009, 11:49:31]
Keterangan
AG4040TF
Brackish Water Desalination
Reverse Osmosis, High Rejection
The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry. AG4040TF High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. This element is designed with male end connections.
Element Specifications
Model Flow Active Area Avg. Rejection Min. Rejection Part Number
AG4040TF 8.3 m3/d 7.9 m2 99.5% 99% 1206774
Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77°F (25°C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary +25%/ -15%.
Operating and Design Parameters
Membrane: Thin Film Membrane (TFM®)
Typical Operating Pressure: 1,379 kPa
Maximum Pressure: 3,103 kPa
Maximum Temperature: 50°C
Chlorine Tolerance: 1,000 ppm-hrs, dechlorination recommended
Optimum Rejection pH: 7.0 -7.5
Operating pH Range: 4.0 - 11.0
Cleaning pH Range: 2.0 - 11.5
Maximum Pressure Drop: 10 psig (69 kPa) per element
50 psig (345 kPa) per vessel
Feed NTU:
Prioritas Indotrade Tahun ke-13
www.profilterindonesia.com
