Planet VC-202A, UTP 10/ 100 to Coaxial Media Converter

Harga:

Kunjungi http://polaris.web.id

Jumlah Pesanan:

Negara Asal:

Taiwan

VC-202, Ethernet over VDSL 2 Converter ( 1 x BNC, 1 x RJ-45)
Ethernet Distance extension via Coaxial
The VC-202 has high-performance Ethernet-over-VDSL2 product that converts between twisted pair ( UTP) and coaxial. It is based on two core networking technology: Ethernet and VDSL2 ( Very-high-data-rate Digital Subscriber Line 2) . This technology offers the absolutely fastest data transmission speeds over existing coaxial cable without the need of rewiring. When using a pair of VC-202 converters back to back, they connect between two Fast Ethernet LANs via coaxial cable. On the UTP side, the VC-202 uses a modular EIA / TIA 568 RJ45 connector that supports categories 3, 4, 5 or above wiring and connects to distance up to 100 meters ( 328 feet) . On the coaxial cable side, the VC-202 utilizes a BNC connector and supports a 50ohm cable and distance up to 1.6km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable.

Cost-Effective / Quick Upgrade Legacy Devices to All-IP network

PLANET' s VC-202 converter provides a quick replacement and smooth migration solution from existing analog system to full digital system. For example:
# Cable TV to IPTV
# Analog Camera to IP Camera

The VC-202 combines the well proven Ethernet and VDSL technology to transmit the Ethernet format data by using VDSL signaling over the most widespread coaxial cable. Therefore, it is very good for upgrading legacy devices to new digital devices of IP-based network because almost every house or block on the street could use the existing coaxial cable to transmit data to the Internet and the whole building could share the Internet line in the wide network area with minimum cost. Reuse the exist cable instead of new wire, it saves wiring cost made by people and makes coaxial cable and Ethernet line which cover anywhere.

Easy Installation
The Converter is plug and play without configuring any software and also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front-panel provide the operating status of individual port and the whole system. There are two selectable models of the VC-202, one is used for client side ( CPE) and the other is central side ( CO) .

Key Features
# Cost-effect VDSL2 CO / CPE bridge solution
# One box design, CO / CPE selectable via DIP Switch
# Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards
# DMT ( Discrete Multi-Tone) line coding
# Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
# Support up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent
# VDSL2 stand-alone transceiver for simple bridge modem application
# Advantage of minimum installation time ( Simply as Plug-and-Play)
# Selectable target data rate and target SNR margin
# Support extensive LED indicators for network diagnostics
# Co-work with PLANET MC family Media Chassis ( MC-700 / 1000R / 1500)
# Compact in size, easy installation

Kenalkan ke teman Anda