MIKASE LABORATORY - PT MITRA KATIGA SEJAHTERA / SUPPLIER ALAT UJI KUALITAS UDARA, AIR, CUACA , KEBISINGAN SERTA GETARAN

Keterangan

The HD2305.0 is a portable instruments with a large LCD display. It measures the pH and the redox potential ( ORP) in mV. It measures the temperature using Pt100 or Pt1000 immersion, penetration or contact probes.
The electrode calibration can be carried out on one, two or three points at 4.01pH, 6.86pH and 9.18pH.
The temperature probes are fitted with an automatic detection module, with the
factory calibration settings already being memorized inside.
The Max, Min and Avg function calculate the maximum, minimum or average values. Other functions include: the relative measurement REL, the Auto-HOLD function, and the automatic turning off that can also be disabled.
The instruments have IP67 protection degree.

INSTRUMENT TECHNICAL CHARACTERISTICS
Instrument
Dimensions ( Length x Width x Height) 140x88x38mm
Weight 160g ( complete with batteries)
Materials ABS
Display 2x41D2 digits plus symbols
Visible area: 52x42mm
Working conditions
Operating temperature -5… 50° C
Warehouse temperature -25… 65° C
Working relative humidity 0… 90% RH without condensation
Protection degree IP67
Power
Batteries 3 1.5V type AA batteries
Autonomy 200 hours with 1800mAh alkaline batteries
Power absorbed with instrument off 20¼ A
Connections
Input module for the
temperature probes 8-pole male DIN45326 connector
pH/ mV input Female BNC
Measurement of pH by Instrument
Measurement range -2.000… + 19.999pH
Resolution 0.01
Accuracy ± 0.01pH± 1 digit
Input impedance > 1012©
Calibration error @ 25° C Offset> 20mV
Slope63mV/ pH
Sensitivity 106.5%
Measurement of mV by Instrument
Measurement range -1999.9… + 1, 999.9mV
Resolution 0.1mV
Accuracy ± 0.1mV
Drift after 1 year 0.5mV/ year
Measurement of temperature by Instrument
Pt100 measurement range -200… + 650° C
Pt1000 measurement range -200… + 650° C
Resolution 0.1° C
Accuracy ± 0.1° C
Drift after 1 year 0.1° C/ year