MIKASE LABORATORY - PT MITRA KATIGA SEJAHTERA / SUPPLIER ALAT UJI KUALITAS UDARA, AIR, CUACA , KEBISINGAN SERTA GETARAN

Keterangan

The HD103T.0 measures air speed by using an omnidirectional hotwire probe. It has three configurable analogue outputs: 4… 20mA and 0… 20mA current outputs and 0… 10Vdc voltage output ( 0… 1Vdc or 0… 5Vdc outputs can be supplied on request) . The output can be chosen by using the jumpers inside the instrument.
The sensor set on the top of the probe is very delicate and must be protected with the
special frame provided with the instrument. During transportation, the sensor is closed into a cylinder screwed on the top of the probe; during installation, unscrew this cylinder and screw the protective cover in its place.

Technical specifications Notes
Air speed Measuring range 0.05… 5m/ s
Air speed Accuracy range 0… 0.99m/ s range 1… 5m/ s
± 0.04m/ s ± 0.2m/ s at 50% RH and 1013hPa
Temperature measuring range -20… + 80° C
Temperature Accuracy range 0… 70° C
remaining range ± 0.3° C ± 0.4° C
Output
( for both temperature and air speed)
4… 20mA
0… 20mA
0… 10Vdc
0… 5Vdc and 0… 1Vdc
outputs on request
Load resistance
RL 100k© for voltage outputs
Power supply 24Vac ± 10% , 50… 60Hz 110Vac or 230Vac
on request
Operating temperature
electronics probe
-5… + 50° C -20… + 80° C
Compensation temperature 0… + 80° C
Storage temperature -10… + 80° C
Electronics protection class IP67
Sensor working conditions Clean air, RH