MIKASE LABORATORY - PT MITRA KATIGA SEJAHTERA / SUPPLIER ALAT UJI KUALITAS UDARA, AIR, CUACA , KEBISINGAN SERTA GETARAN

Keterangan

APPLICATIONS
Analysis of oxygen ( O2) in flue gases from any type of fuel. For checking combustion efficiency, air infiltration,
and burner & control performance of furnaces, heaters, and boilers. May be used in commercial, industrial,
and residential applications.

FEATURES
• Rugged design that is easy to operate and maintain
• Fast warm-up and response
• Long life ' fuel cell' oxygen sensor ( 4-5 year life)
• Digital readout meter with backlight
• Rechargeable battery operation
• Built-in sample pump, filter and flow meter
• Continuous condensate removal
• For use on any fuel
• Weatherproof ( WP) cabinet with clear Lexan cover
• Stainless steel probe with sample hose
• Pays for itself in months through fuel savings

OPTIONS
• Outputs of 0-1V or 4-20 mA
• Stack temperature readout ( 320T)
• Special sampling probes
• Sample pre-cooler
• Suitcase ( K) style cabinet available
• AC only power operation
• O2 alarm with LED
• Detachable/ portable data logger

CALIBRATION
• On air for span
• On nitrogen for zero

DESCRIPTION
The Nova 320 Series of Portable Flue Gas Oxygen Analyzers utilize a reliable, stable oxygen sensor which responds quickly to the oxygen present in the flue gas sample. Its life expectancy is between 3 and 4 years. The sensor is very easy for the customer to replace and at a reasonable cost.
A rechargeable ‘ gel cell’ battery provides enough power for the pump and electronics for about 20 hours of
continuous operation. The analyzer can still be operated while it is being charged. A red LED tells when to
recharge and a green LED confirms that the analyzer is being recharged. The battery recharger is included
with the analyzer.
The detected O2 is displayed on an LCD digital meter that has a switchable backlight for use in dark areas.
The analyzer can be operated for long periods unattended due to its continuous condensate removal feature.
The analyzer is supplied with a 12ft. sample hose and a stainless steel probe.
The Model 320 can optionally indicate stack temperature ( Model 320-T; 0-1800F or 0-1000C) for doing fuel
efficiency calculations. The temperature sensor is built into the sampling probe. Efficiency charts for each fuel are provided.

SPECIFICATIONS
Method of Detection: Long life electrochemical oxygen sensor
Ranges Available: 0-5.0% , 0-10.0% , 0-25.0% , 0-50.0%
Resolution: 0.1% O2
Accuracy and Repeatability: Below 30% O2 ± 1% of full scale; above 30% O2 ± 2% of full scale
Drift: < 2% of full scale for 8 hours of operation
Response Time ( T-90) : 8-10 seconds for 90% of step change
Ambient Temperature Range: 32° to 105° F ( 0-40° C)
Linearity: ± 1.0% of full scale
Size and Weight: WP style - approx. 10" L x 7½ " H x 6½ " D @ 8 lbs ( 25.5 x 19 x 16.5 cm @ 3.6 kg)
K style - approx. 14" L x 6" H x 10½ " D @ 8 lbs ( 35.5 x 15.2 x 26.6 cm @ 5.5 kg)
Power: AC/ DC operation. 115VAC 60Hz for recharging ( other voltages available)
Output: 0-1V or 4-20mA output available as option