Selamat Datang di Indotrade.co.id
Masuk | Daftar

Selamat Datang di

MIKASE LABORATORY - PT MITRA KATIGA SEJAHTERA / SUPPLIER ALAT UJI KUALITAS UDARA, AIR, CUACA , KEBISINGAN SERTA GETARAN

http://indotrade.co.id/mikaselaboratory/

Anggota Prioritas Prioritas Indotrade
Tahun ke-17

menampilkan 176 dari 233
  • Katalog Produk

    PORTABLE FLUE GAS CARBON MONOXIDE ANALYZER, Model : 310 SERIES, Brand : Nova

    Jumlah Pesanan
    Tambah ke Keranjang
    Negara Asal
    Kanada
    Kenalkan ke teman Anda Masukan ke Produk Rekanan

    Keterangan

    APPLICATIONS
    For boiler or furnace flue gas analysis where a continuous oxygen analyzer already exists, but carbon monoxide ( CO) must still be measured.

    FEATURES
    • Rugged design that is easy to operate and maintain
    • Fast warm-up and response
    • Disposable, long life electrochemical CO sensor
    • Rechargeable battery operation
    • Use on flue gas from any fuel
    • Dual range: 0-2000 ppm & 0-4.00% CO
    • Built-in sample pump, filter and flowmeter
    • Continuous condensate removal
    • Rapid reading recovery after CO ' overdose'
    • Stainless steel probe with sample hose

    OPTIONS
    • Recorder outputs of 0-1V or 4-20 mA ( can be isolated)
    • Stack temperature readout ( 310T)
    • Special sampling probes
    • Sample pre-cooler
    • Suitcase ( K) style cabinet available
    • CO alarm with LED
    • Detachable/ portable data logger

    CALIBRATION
    • Air for zero
    • Analyzed calibration gas mixture of
    PPM CO in nitrogen for span

    DESCRIPTION
    The Nova 310 Series Portable Flue Gas CO Analyzer utilizes a reliable, customer-replaceable electrochemical
    sensor which responds quickly to the CO present in the flue gas sample. Its life expectancy is between 3 and 4
    years.
    In operation, a built-in sample pump draws in the flue gas sample through the S.S. probe, 12 ft sample hose,
    condensate removal filter, secondary filter and flow meter then on to the CO detector. The detected CO is
    displayed on an LCD digital meter which has a switchable backlight for use in dark areas. A dual range switch
    allows either the 0-2000 PPM or the 0-4.00% range to be displayed.
    A rechargeable battery provides enough power to the pump and electronics for about 20 hours of continuous operation. The analyzer can still be operated while it is being charged. A red LED light on the front panel indicates when to recharge. A green LED light indicates when the charge is complete. The analyzer is supplied with a 12 ft. ( 4 m) sample hose and S.S. probe.

    SPECIFICATIONS
    Method of Detection: Customer-replaceable electrochemical CO sensor
    Ranges Available: 0-2000 PPM and 0-4.00% CO - switch selectable ( other ranges available)
    Resolution: 1 PPM in PPM range; 0.01% CO in % range
    Accuracy and Repeatability: Better than 1% of full scale, based on a 0-2000 PPM range
    Drift: Less than 1% full scale per day
    Response Time ( T-90) : 20-30 seconds
    Ambient Temperature Range: 0-50° C ( 32° to 122° F)
    Linearity: Better than 1% of full scale
    Size and Weight: WP style - approx. 11½ " L x 8" W x 7¼ " H @ 8 lbs ( 29 x 20 x 18 cm @ 3.6 kg)
    K style - approx. 14" L x 10½ " W x 6" H @ 12 lbs ( 36 x 27 x 15 cm @ 5.5 kg)
    Power: 115VAC and rechargeable battery operation, recharger included. ( 220 VAC available)
    Output Options: Optionally available 4-20 mA or 0-1 VDC
    Alarms: High or low CO alarm with LED ( optional)