Keterangan :

cartridge filter absolute

DESCRIPTIONS
ADM is a non-woven melt-blown multi-layer type cartridge filter made of FDA approved Silicone-Free
Non Foaming Pure Polypropylene material. Suitable for food contact and wide range of process fluid applications.
ADM is the best economical double structure, multiple layers, high purity graded density cartridge filter available in the market with minimum of 2 – 8 times longer life span than conventional depth cartridge filter. Innermost layer of
ADM features a higher density ( 1 grade higher on available micron) fixed pore structure of 3 dimensionally thermal bonded fibers. Outermost layer features a graded density non-woven melt-blown fibers to act as a pre-filter. By filtering larger particles separately at outermost layers, it reduces the load of innermost layer and provides more room for filtrate to flow through. Thus, provides extremely low pressure drop and longer life span of filter.
ADM is thermally bonded without the use of surfactant, binders and adhesives. Thus, provides superior filtration results and eliminates the need for circulation to achieve product clarity. Thermally imposed tiny grooves provide reinforcement to the media surface, ensure even water distribution, lower pressure drop and prolong life span of filter. Suitable for high pressure applications due to the building inner core.

Available in absolute micron rating of 0.5, 1, 3, 5, 10,
25, 50, 75, 100 & 150 micron.
Sealed in individual poly bag.
A guarantee quality product ( ISO 9001 certified) .

SPECIFICATIONS
ABSOLUTE MICRON RATING 0.5, 1, 3, 5, 10, 25, 50, 75, 100 & 150 micron
NOMINAL LENGTH
125, 250, 500, 750, 1000, 1250, 1500 mm or
127, 254, 508, 762, 1016, 1270, 1524 mm
Note: Until 60 Inches.

NOMINAL INNER/ OUTER DIAMETER ( ID/ OD)
Standard : 28/ 63 mm
Note: 30mm inner diameter is available upon request.

MEDIA MATERIAL
Melt Blown Micro-Denier & High Density Silicone Free
Pure Polypropylene Fibers.

INNER CORE AND END ADAPTOR MATERIAL
1) Pure Polypropylene
2) Reinforced Polypropylene With Glass

END STYLE
1) DOE : Double Opened End
2) SOE : Single Opened End
i) S2C : SOE, 222 O-Ring With Closed End
ii) S2F : SOE, 222 O-Ring With Finned End
iii) S6C : SOE, 226 O-Ring With Closed End
iv) S6F : SOE, 226 O-Ring With Finned End

GASKET MATERIAL
1) PE : PE Foamed Gasket ( Standard)

O-RING MATERIAL ( OPTIONAL)
1) Standard : EPDM
2) V : Viton
3) S : Silicone
4) T : Teflon
Note: For filter with SOE style only.

OPERATING CONDITIONS
MAX. DIFFERENTIAL PRESSURE
2.1 Bar ( 30 PSID) at 60oC
4.8 Bar ( 70 PSID) at 20oC

MAX. OPERATING TEMPERATURE
80oC at 10 PSID

CHANGE OUT DIFFERENTIAL PRESSURE
2.4 Bar ( 35 PSID)