* HUMAN VIBRATION METER Model ( HVM-100) .

Hubungi Bapak HIBOR 081210434500/ 081210582600 email : sales_tokogsi@ hotmail.com Tlp/ Fax: 021-30012552

FUNGSI : UNTUK MENGUKUR GETARAN KECEPATAN KERJA.

Technical Specifications
Input Types:
ICP® sensors, charge output sensors, direct voltage
Input Range: > 100 dB ( in multiple ranges)
Range Gain: × 1, × 10, × 100, × 1000
Calibration: By level or sensor sensitivity entry
Units: m/ s2, cm/ s2, ft/ s2, in/ s2, g, dB
Metrics for each mode:
Vibration:
Arms, Amin, Amax, Aeq, Amp, PEAK
Hand-arm:
Arms, Amin, Amax, Aeq, Amp, PEAK, A( 1) , A( 2) ,
A( 4) , A( 8) , A( 8) Allowed Exposure Time
Whole body:
Arms, Amin, Amax, Aeq, Amp, Peak, CFmp, CF,
VDV
Frequency weightings:
Vibration:
Ws ( Severity) , Fa ( 0.4 Hz to 100 Hz) ,
Fb ( 0.4 Hz to 1250 Hz) ,
Fc ( 6.3 Hz to 1250 Hz)
Hand-arm:
Wh
Whole body:
Wb, Wc, Wd, We, Wg, Wj, Wk, WB
Setups: Store up to 10 user setups
Memory: 100 measurements, 1 min to 99 hr
Time history:
120 samples of Arms and PEAK at a period of 1, 2,
5, 10, 20, 30, 60 seconds
Interface: RS-232 on 8 pin DIN, up to 115 kbps
Printout:
Custom 3 line header, data and time history
Outputs for each channel:
AC: Weighted or band-limited
DC: rms, min, max, peak, sum rms, sum max,
sum min, sum peak
Peak: ± 0.5 dB accuracy
Power: ( 2) AA batteries ( IEC Type LR6)
Weight: 300 gm ( 10.6 oz)
Dimensions: 1.1 × 3.3 × 6.0 in ( 28 × 84 × 152 mm)
compliant
Standards Met:
ISO 8041: 1990/ Amd 1: 1999, 2631-1: 1997, 2631-
2: 1989, 2631-4: 2001, 5349-1: 2001, and 5349-
2: 2001, plus it provides the Whole Body
frequency weighting Wg specified in the British
Standard BS 6841: 1987
Accessories ( included)
Your choice depending on required connector type
CBL120:
Cable, ( 3) 10-32 male to 4-pin Lemoâ„¢ female
CBL121:
Cable, ( 3) BNC male to 4-pin Lemoâ„¢ female
CBL122:
Cable, 4-pin Microtech to 4-pin Lemoâ„¢ female
CBL123:
Cable, 6-pin DIN male to 4-pin Lemoâ„¢ female
CBL125: Cable, Mini 4-pin to 4-pin Lemoâ„¢ male
Batteries: ( 2) AA, IEC Type LR6
User manual
Accessories ( optional)
SEN020 to SEN022: Triaxial ICP® accelerometers
SEN023 to SEN025: Single axis ICP® accelerometers
SEN026: Triaxial ICP® palm accelerometer
SEN027: Triaxial ICP® seat pad accelerometer
SEN020-CBL to SEN022-CBL:
Triaxial ICP® accelerometers including cables
SEN023-CBL to SEN025-CBL:
Single axis ICP® accelerometers including cables
SEN026-CBL:
Triaxial ICP® palm accelerometer including cable
SEN027-CBL:
Triaxial ICP® seat pad accelerometer including
cable
CBL002: Cable, serial printer ( DB25S-mDIN08)
CBL006: Cable, serial computer ( DB9S-mDIN08)
CBL091: Cable, serial printer ( HPLJ4-MDIN08)
CBL120:
Cable, ( 3) 10-32 male to 4-pin Lemoâ„¢ male
CBL121: Cable, ( 3) BNC male to 4-pin Lemoâ„¢ male
CBL122:
Cable, 4-pin Microtech to 4-pin Lemoâ„¢ male
CBL123:
Cable, 6-pin DIN male to 4-pin Lemoâ„¢ male
CBL124: Cable, AC/ DC output
CBL125: Cable, Mini 4-pin to 4-pin LEMOâ„¢ male
ADP060: Adaptor, hand accelerometer
ADP061: Adaptor, handle accelerometer
ADP062: Adaptor, clamp accelerometer
ADP063: Adaptor, palm accelerometer
ADP064: HVM100 adaptor kit
PCB394M26: Hand-held accelerometer calibrator
PCB-080A09:
Adaptor, probe tip with 10-32 connector
PCB-080A17: Adaptor, triaxial mounting
CCS020: HVM100 hard shell carrying case
PSA027: Power supply, 90-264 VAC to 12 VDC
TRP001: Tripod