Katalog Produk

Keterangan

Features

* Simultaneous detection of up to 6 different gases
* Wide variety of field proven gas sensors available
* IR Sensors available for CO2 , % LEL CH4 , and 0-100% volume CH4
* Transformer testing version available
* PPM / LEL hydrocarbon detection
* Powerful long-life pump with125’ range
* Low flow pump shut off and alarm
* Methane elimination switch for environmental use
* Security “Adjustment Lockout Switch�
* Up to 30 hours of continuous operation
* Alkaline or Ni-Cad capability
* Ergonomic RFI/EMI/Chemical resistant case
* Datalogging option
* Autocalibration
* Intrinsically safe design, CSA/NRTL & UL Classified

nclosure Weather resistant, chemical resistant, RF/EMI coated high impact polycarbonate polyester blend. Can be set in rain or into 2.5 inches of water without damage. Ergonomically balanced with rugged top mounted handle.
Dimensions : 10.5" long x 5.9" x 7" tall
Weight : 5 lbs.
Detection Principle Catalytic combustion, electrochemical cell, galvanic cell, and infrared.
Sensor : Life 2 years under normal conditions.
Sampling Method : Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH.
Display : 4 x 20 LCD readout with backlighting. Viewed through window in case top. Displays readings & status of all channels simultaneously.
Alarms 2 alarms per channel plus TWA and STEL alarms. Fully adjustable for levels, latching or self reset and silenceable.
Alarm Method Buzzer 85dB at 30 cm, dual high intensity LED’s, and blinking display.
Controls 6 external push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA /STEL values, battery status and many other features.
Continuous Operating Hours : 30 hours minimum using alkaline batteries, or 18 hours using Ni-Cads.
Power Source : Size D batteries, 4 alkaline or Ni-Cad. Charger has alkaline recognition to prevent battery damage if alkalines are charged.
Operating Temp. & Humidity -10°C to 40°C (14°F to 104°F), 0 to 95% RH, non-condensing.
Indication Accuracy : Maximum variance +/- 5% of full scale.
Response Time 30 seconds to 90% (for most gases).
Safety Design : Intrinsically Safe, Class I, Division 1, Groups A, B, C and D. CSA / NRTL & UL Classified (most versions).
Standard Accesories : Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose (for special toxic gas versions, shorter teflon hose used without probe).
Optional Accessories : • Datalogging of up to 4 gases (No datalogging possible on 5 or 6
gas versions or versions with more than 2 toxic sensors)
• Remote alarm
• Dilution fitting (50/50)
• Ni-Cad batteries
• Battery charger, 115 VAC, 220 VAC, or 12 VDC
• Continuous operation adapter, 115 VAC or 12 VDC
• Extra loud buzzer
• Extension probes
• Internal hydrophobic filter (strongly recommended)
Warranty One year material and workmanship

Gases & Detectable Ranges

Standard Confined Space Gases
Hydrocarbons : 0 - 100% LEL
0 - 50,000 ppm
Oxygen (O2 ) : 0 - 40% Vol.
Carbon Monoxide (CO) : 0 - 500 ppm
Hydrogen Sulfide (H2S) : 0 - 100 ppm
Super Toxics and Other Gases
Ammonia (NH3 ) : 0 - 75 ppm
Arsine (AsH3 ) : 0 - 1 ppm
0 - 200 ppb
Carbon Dioxide (CO2 ) (I R Sensor) : 0 - 5,000 ppm
0 - 10,000 ppm
0 - 5% Vol.
0 - 20% Vol.
0 - 50% Vol.
Chlorine (Cl2 ) : 0 - 3 ppm
Chlorine Dioxide (ClO2 ) : 0 - 1 ppm
Fluorine (F2 ) : 0 - 5 ppm
Hydrogen Fluoride (HF) : 0 - 9 ppm
Hydrogen Chloride (HCl) : 0 - 15 ppm
Hydrogen Cyanide (HCN) : 0 - 30 ppm
Methane (CH4 ) (I R Sensor) : 0 - 100% LEL
0 - 100% Vol.
Nitrogen Dioxide (NO2 ) : 0 - 15 ppm
Ozone (O3 ) : 0 - 1 ppm
Phosphine (PH3 ) : 0 - 1 ppm
Silane (SiH4 ) : 0 - 15 ppm
Sulfur Dioxide (SO2 ) : 0 - 30 ppm
The EAGLE can be provided with up to 6 gas
sensors (4 Toxics maximum). Please specify
gas combination when ordering.

Special Features :

* Low Flow alarm shuts pump off to avoid damage to instrument.
* Hydrophobic filter disc in probe.
* Internal dust filter (or optional internal hydrophobic filter).
* Quick autocalibration using 4 in 1 calibration gas standard.
* Single gas calibration capability.
* Methane elimination switch for environmental applications.
* "Adjustment Lockout Switch" for added security.
* Confirmation beep (silenceable).
* Backlight, automatic for alarms and by demand with adjustable time.
* Meets EPA Method 21 protocol for fugitive emissions testing.
* Land surveyor (land survey equipment).