Katalog Produk

Keterangan

The digital photometer NANOCOLOR® 500 D is the consequent development of our very successful photometer NANOCOLOR® 400 D. Adapted to our customers’ requirements, today and tomorrow, it is suitable for universal use in water and wastewater analysis. This includes municipal and industrial wastewater, drinking water, surface water, ground water as well as cooling and boiler water.

Save time and make your lab time easier

Fast measurements by NANOCOLOR® barcode technology
Fully automatic, instant cuvette detection by the built-in laser scanner allows simple and fast routine analysis
Selection of the test method and suitable wavelength, the actual measurement and storage of the measurement results are carried out automatically without having to use any other key

Measurement without cuvette slot cover
The modern designed optics is insensitive to external light and allows straightforward measurements

Everything at a glance
The modern, illuminated graphic display with user guidance shows all the important data at a glance.

Pre-programmed tests and photometric basic functions
More than 100 pre-programmed tests with over 200 analysis programmes
Straightforward call-up of all photometric basic functions, such as absorbance, factor, standard, transmission and kinetics

Experience precision and increase accuracy
Self-explanatory user guidance

All tests and menu items can be activated fast and easily. The photometer can be operated without any complex and time-consuming training

Manual with test instructions, presented as pictograms
Safe test procedures without complex instructions

Highly accurate measurements by high-quality optical components
The high-precision optic warrented accurate results

Assure results and meet specifications

IQC according to ISO 9001 with NANOCONTROL NANOCHECK
Conformance to requirements of internal quality control (IQC) and protection towards supervisors and authorities
Fast and easy control of photometric accuracy of the NANOCOLOR® 500 D with NANOCONTROL NANOCHECK
(Cat. No. 925 701) by the user himself

Documentation of results in accordance to GLP
Individual entries of sample number, sample location, user and dilution

Clear memory management
GLP-conform storage of the measured results with all supplementary information such as date, time, sample number, sample location, user and dilution
Fast and easy access to stored results and data sets

Convenient export of data
Easy transfer of measured results and spectra to various common PC formats (e.g. MS Excel)
Direct print-out of measured data with the NANOCOLOR® thermal printer (Cat. No. 919 16)

Enjoy flexibility and be prepared for the future
No cuvette adapter required

Round tubes (16 mm OD) and rectangular cuvettes (10, 20, 50 mm) can be used in the universal cuvette slot without any adapter
Small accessories are not required

Programmable for user defined applications
Free programming of up to 100 user defined methods

Fast photometer update - free of charge
At any time, stay up-to-date by easy programme updating via Internet/PC

In the field and in the lab
The standard built-in, robust high-performance battery with charge regulator allows continuous operation at 220V (110V) and up to 3000 on-site mains-independent measurements. The battery charge status is shown in the graphic display. In the power saving mode, the photometer switches off automatically after 10, 20… 120 min.

Technical data
Type: Filter photometer with microprocessor control, self-test and auto-calibration
Light sources: Tungsten lamp
Optical system: Automatic filter wheel with 10 interference filters
Wavelength: 345 / 365 / 436 / 470 / 520 / 540 / 585 / 620 / 690 / 800 nm
plus 2 compartments for additional filters
Wavelength accuracy: ± 2 nm
Wavelength calibration: Automatic
Wavelength selection: Automatic, barcode
Spectral bandwidth: 10 – 12 nm
Photometric range: ± 3.0 E
Measuring modes: More than 100 pre-programmed tests, 100 optionally programmable methods, absorbance, transmission, factor, kinetics
Cuvette holder: round tubes 14 mm ID, rectangular cuvettes 10, 20, 50 mm
Data memory: 500 measured data sets, GLP conform
Display: graphic display, backlight, 64 x 128 pixels
Operation: bar code technology, display user guidance, foil-covered push-buttons
External light: Insensitive, open cuvette slot
Interfaces: USB 1.1 and bidirectional serial RS 232
Update: Via Internet / PC
Operating range: 10-50 °C , max. 90% relative humidity (without condensation)
Power supply: 100 – 240V~, 50/60 Hz / 6V, 3.2 Ah via built-in battery with charge regulator and mains power supply
DimensionsL / B / H: 227 x 282 x 105 mm
Weight: 2,4 kg
Warranty: 2 years
This appliance comply with the following EC directives:
– 73/23/EEC of 19.02.1973 – Low-Voltage Directive
– 89/336/EEC of 03.05.89 (including amendment directive 92/31/EEC) – EMC Directive

Ordering information
Universal photometer NANOCOLOR® 500 D incl. software CD, manual, dust cover, mains power supply, USB cable, data cable and calibration cuvette in stable transport bag
Cat.No. 919 500

For water test from alumunium to zinc
Reagents kit are excludes