Katalog Produk

Keterangan

Chill, heat or freeze 2 separate sets of samples at 2 separate temperatures with individual control from -10°C to 100°C

Model IC22 Features:

Energy efficient Peltier design

Digital control to 1°C from -10 to 100°C
2 separate temperatures on separate plates

Sample blocks for 0.2, 0.5 and 1.5 ml centrifuge tubes, 96-well and 384-well assay plates, 2ml vials, various sizes of test tubes and more.

Control at room temperature

2 count-down timers (up to 30 days each) with alarm

RS232 I/O port for control or data collection

2 data loggers

Electronic calibration.

Compact size. Small footprint on the bench

UL, CSA, and CE approvals

12 month warranty

Some IC20 Applications
Maintaining 14°C for ligation reactions

Maintain 17°C for storing oocytes

Storing samples at ice bucket temperatures

Incubate samples at 37°C

Cooling blood samples prior to coagulation testing

Storing enzymes or DNA libraries at your workstation

Enzyme reactions and deactivations

Freeze and store most any small sample at your workstation

Product Description:

Torrey Pines Scientific's Model IC22 Digital Chilling/Heating Dry Baths are compact, completely solid state, versatile, reliable, and easy to use. Each heating/chilling station has its own Peltier module. The entire unit has only two moving parts: the fans. Each plate can be set separately for any temperature within the range of unit without interaction between the plates. The IC22 has simple digital controls and a two-line alphanumeric digital display that is backlit for easy viewing. The display shows the target and actual temperatures of both plates. Additionally, the display can be made to show the countdown timers. There are power and buffer lamps on the front panel to indicate when the unit is turned on and when the buffer is collecting data points for the data logger.

The chilling/heating surfaces is a 2.875� (7.3 cm) x 4.375� (11.1 cm) aluminum plates that are very flat for good contact with the sample blocks. When unloaded, the plates will reach below 0 °C in under two minutes. They will heat to 37 °C in under a minute. The chilling and heating rates will change with loads. For instance, temperatures to 4.0 °C can be reached on sample blocks as large as 4� (10.2 cm) x 3� (7.6 cm) x 6� (15.2 cm) in about half an hour.

The units are complete with instruction manual and AC line cord. Sample blocks and covers are available as accessories and are shown on the price list.
Product Specification:

Temperature:
Range on each plate -10°C to 100°C
Readability 1°C
Accuracy ±1°C
Stability ±1°C
Sensor Platinum RTD
Controller Type PID
Uniformity ±0.5°C

Timers:
Range 00:01 seconds to 30 days
Readability 1 second
Audible Alarm Yes, sounds for 1 minute. Timer counts up until turned off.
Auto-Off Yes, user settable.

Data Logger: Sample times
1 sec, 1 min, or 5 minutes per data point
Capability 8110 data points

Electrical:
Heater/Chiller 50 watts each station. 100 watts total.
Operating Voltages 230 VAC, 50/60 Hz 1 amp
Power Consumption 115 watts
Power Switch Yes

Dimensions: Chilling/Heating Module
Width 6.5" (16.5 cm)
Depth 20" (50.8 cm)
Height 3.5" (8.9 cm)
Weight 13 lbs. (5.85 kgs)

Accessories Available:
620-5012 Block, aluminum, 40 holes for 0.5 ml centrifuge tubes.
620-5013 Block, aluminum, 30 holes for 1.5 ml centrifuge tubes.
620-5014 Block, aluminum, 40 holes for 0.5 ml and 15 holes for 1.5 ml
620-5015 Block, aluminum, 96 holes for 0.2 ml PCR tubes spaced for 8 and 12 tube strips.
620-5016 Block, aluminum, for "V" bottom 96-well assay plates
620-5017 Block, aluminum, for round bottom 96-well assay plates
620-5018 Block, aluminum, 24 holes for 2.0 ml vials
620-5019 Block, aluminum, 384 holes for 384-well assay plates
620-5020 Block, aluminum, for flat bottom 96 and 384-well assay plates
620-5021 Block, aluminum, 24 holes for 10 mm test tubes
620-5022 Block, aluminum, 12 holes for 15/16 mm test tubes
620-5023 Block, aluminum, 20 holes for 12/13 mm test tubes
620-5024 Block, aluminum, mixed holes for various sized test tubes
620-5025 Block, aluminum, 8 holes for 20 mm test tubes
620-5026 Block, aluminum, 30 holes for 6 mm test tubes
620-5027 Block, aluminum, 12 holes for 15ml centrifuge tubes
620-5028 Block, aluminum, 12 holes for 20ml scintillation vials
620-5030 Block, aluminum, 6 holes for 50ml centrifuge tubes
620-5031 Block, Aluminum, 4-slides for hybridizations, with black cover
620-5032 Block, Aluminum for 30-2.0ml Eppendorf centrifuge tubes
720-0008 Cover, assay plates and all assay plate blocks, 1.75" high
720-0009 Cover, aluminum blocks, 3.25" high