Katalog Produk

Gambar lebih besar

HI 98302 TDS Tester

Harga	negosiasi
Jumlah Pesanan:
Cara Pembayaran	Transfer Bank (T/T)
Kemas & Pengiriman	unit
Negara Asal	Amerika Serikat

Kenalkan ke teman Anda

Keterangan

HI 98302
TDS Tester, Range up to 10000 ppm
DiST testers are reliable, pocket-sized instruments that will give you quick and accurate readings of conductivity and TDS.

This popular line of Dissolved Solids Testers have been redesigned to offer a host of improvements.

The casing has been modified to provide increased strength, a better fit for holding and a large LCD for easy viewing. The graphite sensors provide better repeatability since they do not oxidize. The casing has been engineered to allow air bubbles to escape. The temperature sensor is exposed to provide faster response time.

HI 98300, HI 98301 ( DiST 1) and HI 98302 ( DiST 2) perform TDS measurements, while HI 98303 ( DiST 3) and HI 98304 ( DiST 4) provide conductivity readings.

If calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester.

Order Information:
HI 98302 ( DiST 2 with TDS factor = 0.5) is supplied with protective cap, screwdriver, batteries and instructions.

Spesification
Range 10.00 ppt ( g/ L)
Resolution 0.01 ppt ( g/ L)
Accuracy ± 2% F.S.
TDS Factor 0.5
Calibration Solution HI 70038
Calibration manual, 1 point
Probe HI 73302
Temperature Compensation automatic, 0 to 50° C ( 32 to 122° F)
Battery Type / Life 4 x 1.5V / approx. 200 hours of continuous use
Environment 0 to 50° C ( 32 to 122° F) ; RH max 95%
Dimensions 175 x 41 x 23 mm ( 6.9 x 1.6 x 0.9" )
Weight 95 g ( 3.4 oz.)