MEMORY HiCORDER MR8880-20

Capture high- to low-voltage signals in a single device! Rugged, Professional and Ready for the Field

CAT III 600 V insulation performance; Can measure directly 480 V power line.
4 completely isolated channels let you simultaneously record data on a 3-phase power line plus have one extra channel
Tough against harsh environments; Operating temperature range -10° C to 50° C
Built to withstand mechanical shocks and vibrations ( ships standard with side protectors)
Make settings easily with PRESETS function

specifications ( accuracy guaranteed for 1 year)
Number of channels 4 analog channels + 8 logic channels ( standard) Note: Isolated analog channels, isolated input and frame, logic has common GND
Measurement ranges
( 10 div full-scale) 4 channels of voltage measurement; mode switchable between instantaneous waveform, or RMS value
10 mV to 100 V/ div, 13 ranges, resolution: 1/ 640 of range
RMS value mode: DC, or 30 Hz to 10 kHz, Crest factor: 2
Max. rated voltage Between terminals: 600 VAC, DC
Between terminal to earth: 600 VAC, DC CAT III, 300 VAC, DC CAT IV
Frequency characteristics DC to 100 kHz ( ± 3dB)
Time axis ( High-speed function) 100 ¼ s to 100 ms/ div, 10 ranges, Sampling period: 1/ 100 of range
Recording intervals ( Real-time function) 100 ¼ s to 1 minute, 19 selections ( simultaneous sampling in all channels)
Measurement functions High-speed function ( high speed recording)
Real-time function ( actual time recording)
Memory capacity 14-bits × 1M-Words/ ch ( 1 word = 2 bytes)
Removable storage CF Card slot × 1, USB 2.0 memory × 1, ( Up to 2 GB)
Printing [ Printer unit is option] 112 mm ( 4.41 in) × 18 m ( 59.06 ft) , thermal paper roll, Recording speed : 10 mm ( 0.39 in) / sec
Note: Printing is not supported when using alkaline batteries
Display 5.7-inch VGA-TFT color LCD ( 640 × 480 dots)
Displayable languages English, Japanese
Communication interfaces USB 2.0 mini-B receptacle × 1; Transfers files from the installed CF card or USB memory stick to a PC when connected, and External PC control
Power supply AC ADAPTER Z1002: 100 to 240 VAC ( 50/ 60 Hz) , 11 VA ( when Real-time recording) , 40 VA ( when Real-time recording and printing)
BATTERY PACK Z1000: AC adapter has priority when used in combination with battery pack, recharge with AC adapter 3 hours, Continuous use 3 hours ( at back-light ON)
LR6 ( AA) alkaline batteries × 8, Continuous use 40 minutes, ( with back-light ON, cannot be used with the PRINTER UNIT)
DC power supply: 10 to 28 VDC ( cable available by special order)
Dimensions, mass 205 mm ( 8.07 in) W × 199 mm ( 7.83 in) H × 67 mm ( 2.64 in) D, 1.76 kg ( 62.1 oz) ( with the BATTERY PACK installed)
When printer is combined - with main unit: 303 mm ( 11.93 in) W × 199 mm ( 7.83 in) H × 67 mm ( 2.64 in) D, 2.26 kg ( 79.7 oz) ( with the BATTERY PACK installed)
Supplied accessories Instruction Manual × 1, AC ADAPTER Z1002 × 1, Alkaline battery box × 1, Strap × 1, USB cable × 1, Application Disk ( Wave Viewer Wv, Communication Commands table) × 1