Keterangan :

Mechanical Bulk Meter CM Series
' Bulk Meters' from Avery Hardoll provide the following : -

Bulk Meter Flow rates from 100 Lpm to 5500 Lpm.
Not effected by outside factors caused by the installation.
Stepless calibration system.
Accuracy consistent between calibration levels.
Bulk meters suitable for use in distribution depots and aviation refuelling vehicles.
Repeatability better than 0.02% .
Automatic additive injector available.
Electronic bulk meter control available.
Serviceability: bulk meters designed for quick and easy maintenance.
Construction
Manifold : Fabricated steel
Ductile Iron ( Single/ Double capsule)
Cast Aluminium ( 6" Triple Only)
Body : Ni-Resist cast iron
Vanes : Carbon
Rotor : Aluminium or Ni-Reset Cast Iron
Covers : Carbon
Bearings : Stainless Steel
Seals : High nitrile or Fluorocarbon
Spesification
Maximum Working pressure : 10.5 bar ( 150 psi)
Test pressure : 21 bar ( 300 psi)
Temperature range : -28º C to 100º C
Volume per revolution : 2.27 litres ( single capsule)
4.54 litres ( double capsule)
6.82 litres ( triple capsule)
: 9.08 litres ( 4 capsule)
Repeatability typically : 0.02%

Flow Range
CM 1000
Pipe Line Size : 2-1/ 2" ( 63 mm)
Flow Rate : 100 to 1000 lpm
6 to 60 m³ / hr
Flanges : ASA 125 FF
Material : Ductile Iron

CM 1400
Pipe Line Size : 3" ( 76mm)
Flow Rate : 140 to 1400 lpm
8 to 84 m³ / hr
Flanges : ASA 125 FF
Material : Ductile Iron

CM 2500 : 4" ( 102mm)
Flow Rate : 250 to 2500 lpm
15 to 150 m³ / hr
Flanges : ASA 150 FF
Material : Ductile Iron Steel

CM 5000 : 6" ( 152mm)
Flow Rate : 500 to 5000 lpm
30 to 300 m³ / hr
Flanges : ASA 150 FF
Material : Steel

CM 5500 : 8" ( 203mm)
Flow Rate : 550 to 5500 lpm
33 to 330 m³ / hr
Flanges : ASA 150 FF
Material : Steel