JAR TEST ( FLOCCULATOR ) 4 SPINDLE

JLT-4 flocculator is designed both for optimizing the dosing of coagulants for separating pollutants in wastewater treatment plants thanks to the laboratory evaluation results obtained with the so-called Jar Test, and for running toxic substance leaching tests on solid wastes to be sent to the dump.
The multiple stirrers with reproducible stirring speeds allow standard conditions for the tests to be adopted, a basic requirement in order to get reproducible results.
The sample being examined can be backlit using a special switch found on the front panel so that reading is easier.
The instrument has an ergonomic design. The control panel is slightly inclined to make setting and reading the selected parameters easier. Rotation speed can be programmed from 10 to 300 rpm, with 1 rpm selection, and the remaining time for stirring operation can be set on two different scales ( in hours or minutes) .

GENERAL FEATURES

Construction material: epoxy painted metal structure

Number of stirring rods: 4

Stainless steel stirring rods: adjustable in height by a selfblocking chuck

Back panel: disconnectable lighted

DC gear motor

Monoselector: same speed for each rod

Power: 11 W

Power supply: 115 V or 230 V / 50-60 Hz

Weight: 13 kg ( 28.6 lb)

Dimension ( WxHxD) : 645x347x260 mm ( 25.4x13.7x10.2 in)

PERFORMANCES
Electronic speed control: from 10 to 300 rpm
Speed setting interval: 1 rpm
Microprocessor controlled timer: 0 ÷ 999 min or 0 ÷ 99 hours ( or continuous