Specification :

Specification:
Name LED Ceiling Down Light LED Ceiling Down Light
Part Number HP-CD-15-HC HP-CD-30-HC
Input power 15W 30W
Lamp Flux 640lm 2400lm
Input Voltagg 90VAC-260VAC 90VAC -260VAC
Working Current 50mA 80mA
Frequency 50Hz/ 60Hz 50Hz/ 60Hz
AC Power Factor 98% 98%
DC Power Efficiency 94% 94%
Color Temperature 3500K-6500K 3500K-6500K
Color Rendering Index Ra> 80 Ra> 80
LED Chip Epistar( Taiwan) Epistar( Taiwan)
Light Cource Life 50000 h 50000 h
Working Temperature -40 ^ + 50 -40 ^ + 50
Working Humidity 10% ^ 90% 10% ^ 90%

Application:
Factory workshop, office, Meeting Room,
Warehouse, Hotel, Classroom, KTV, etc.

Specification:
High voltage low current, low power dissipation & long endurance.
Radiator with columnar to dissipate heat from all directions.
High quality, low temperature rise and low light decline.
Energy-saving and environment friendly.

Installation instruction and precautions
The installation of the ceiling light should be carried out by the electronical professional
Check the integrity of the products while pulling it out from the box
Keep at least 0.2m off the flammable materials.
With 2cm gap between the ceiling and the light, not recessed wholy in the ceiling, or around the heating wall.
the low-voltage and high voltage connection should be separated alignment.
The wire on the lght can be through the drilled hole of the ceilng and fix it together with other wire on the back of the light by a fixed clamp , ensuring the fixation
ensuring the sufficient length of the wire, , not subject to tension or shear force. Do avoid excessive connection pull while installing., No knotting the wire connetion. Do distinguishing the output connections, not to be confused with other lights.
After installation, plug the low voltage of the light to the switching power supply
Non-professionals should not demolish and maintenance the fixture. Right is reserved by our company of dismantiling , repairing , replacing and offering the warranty service.

Safty notice:
Only used out the packing
To make sure the products not damaged during the transportation.Otherwisek, do not install and apply it.
Do not repair yourself, but only the proffetional engineer.