Selamat Datang di
3 engineering co

Anggota Gratis
3 engineering co
3 engineering co
Indonesia
  • Katalog Produk

    Dow Corning 730 Solvent Resistant Sealant

    Harga:
    telp 33832900,085883358833,087882014995,081388688801
    Jumlah Pesanan:
    Negara Asal:
    Amerika Serikat
    Cara Pembayaran:
    Tunai
    Kemas & Pengiriman:
    tube

    Keterangan :

    Dow Corning® 730 Solvent Resistant Sealant
    Primary Use – Bonding, sealing and caulking where resistance to fuels, oils and solvents is required.
    Applications – Assembling and repairing fuel lines and tanks; bonding components exposed to fuels, oils, solvents; making formed-in-place gaskets for chemical compressors, fluid-filled distributors and transformers; repairing rubber linings exposed to corrosive conditions; sealing pipe joints on lines carrying corrosive chemicals.

    Dow Corning 730 Solvent Resistant Sealant is a ready-to-use, solventless, nonslumping fluorosilicone rubber paste that reacts with moisture in the air to form a tough, rubbery solid. It is a fluid-resistant material that is ideally suited for use in many applications where resistance to fumes, splash, and sometimes even total immersion in fuels, oils and solvents is needed. Dow Corning 730 Solvent Resistant Sealant features good resistance to weathering, vibration, moisture, ozone, and temperature extremes. It retains its flexibility over a wide temperature range from -85 to 500° F ( -65 to 260° C) . Dow Corning 730 Solvent Resistant Sealant can be applied overhead or on vertical surfaces without fear of sagging, slumping or running off.
    HOW TO USE
    Dow Corning 730 Solvent Resistant Sealant is supplied ready to use. Under pressure, it flows readily from its container. The paste-like consistency makes it easy to work; a spatula or wooden paddle can be used for tooling the surface.
    Dow Corning 730 Solvent Resistant Sealant cures inward from the surface. At conditions of 75° F ( 24° C) and 50 percent relative humidity, the sealant forms a skin within 10 minutes. Tooling is not practical after the skin begins forming. Alternate periods of application and tooling may be required.
    Cure
    Cure time is affected by relative humidity, degree of confinement and cross-sectional thickness of the sealant. Sections up to 1/ 8-inch thick become rubbery solids in about 24 hours at room temperature at 50 percent relative humidity. Higher humidity reduces cure time slightly.
    STORAGE AND SHELF LIFE
    When stored at or below 90° F ( 32° C) , Dow Corning 730 Solvent Resistant Sealant has a shelf life of 18 months from date of manufacture.
    Since moisture in the air will cause the sealant to cure, containers should always be sealed when not in use. Once a container has been opened, a plug of cured sealant may form in the nozzle or tube tip during storage. This is easily removed and does not affect the remaining material.

    http: / / safety07.com/
    virlie enginering co
    YM : virlie_darius@ yahoo.com
    LIVE: virlie.darius@ hotmail.com
    email: mgkkemayoran@ g mail.com
    telp 33832900, 085883358833, 087882014995, 081388688801
    mall mega glodok lt GF block D 5 no 1
    mall mega glodok lt GF block A10 no 1
    mall mega glodok lt GF block A10 no 11



Anda mendapat [3] permintaan baru.
Ke Menu Anggota

Depan - Penawaran Dagang - Daftar Produk - Daftar Permintaan - Daftar Kerjasama - Daftar Perusahaan
© 2024 Indotrade.co.id. Hak Cipta Dilindungi Undang-undang.